this paper presents a finite element analysis and its related experimental test of corrugated steel web beams subjected to fatigue loading. a particular focus in this study was set on the fatigue failure arising from the web-to-flange welded joint of the corrugated steel web beam. a detailed three-dimensional finite element model which explicitly includes the geometry of the web-to-flange welds...

Steel extended end plate bolted connections are recommended to be widely utilized in special moment-resisting frame subjected to monotonic loading. Improper design of steel beam to column connection can lead to the collapse and fatality of structures. Therefore comprehensive research studies of beam to column connection design should be carried out. Also the performance and effect of corrugated...

Corrugated web girders represent a new structural system emerged in the past two decades. The girder’s flanges provide the flexural strength of the girder with no contribution from the corrugated web which provides the girder’s shear capacity. Failure of the web occurs by steel yielding, web buckling or interactively between them. Lateral torsion and local flange buckling of corrugated web gird...

Steel coupling beam (SCB) is a substantial member of the hybrid coupled walls system. When are linked by SCB rather than conventionally reinforced or diagonally beams, system’s strength and energy dissipation capacities greatly enhanced. A corrugated web may be used in instead flat to improve these characteristics even more. This paper presents an experimental numerical investigation shear-carr...

the effect of steel plate thickness on the repair effectiveness of rc beam is presented in this paper. a total of four beams were tested, one beam repaired by cfrp with a thickness of 1.2 mm and used as a control beam, and three beams repaired by a steel plate. steel plates with a thickness of 2 mm, 3 mm, and 4 mm were used in repairing the beams. the maximum load-carrying capacity, deflection ...

The shear panels of plate girder made from corrugated in the web is investigated this research. A beam attached zone as part an experimental and theoretical investigation into girders. In experiments, seven specimens were tested under two points load. Six them different shape web, last specimen was without corrugation a reference called control. study effected (corrugation plate, thickness with...

Sinusoidal corrugated steel web has gradually gained attention over trapezoidal web. The design of shear buckling capacity for the is governed by interactive which normally lowest value among global, local and failures. It was discovered in some studies that a sinusoidal section found to be either or global failures, where there lack study this area. purpose determine effect thickness, height, ...

The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...