This paper reports aldehyde emissions from two-stroke and four-stroke, single cylinder spark ignition (SI) engines with gasohol (80 vol. % gasoline, 20 vol. % ethanol) having copper coated engine (copper-coated thickness, 300 μm) on piston crown and inner side of cylinder head) provided with catalytic converter with sponge iron as catalyst and compared with conventional SI engine with gasoline ...

the openings of copper converter in sarcheshmeh copper complex in iranis made of a heat resisting austenitic steel (fe-25cr-12ni) and many failures have been reported. understanding the failure mechanism of the alloy helps to develop better alloys for similar complex environments. samples of as-cast alloy and those taken from failed ones were examined. optical microscopy (om), x-ray diffraction...

With the advance of insulated gate bipolar transistor (IGBT) converters, Multi-Terminal DC (MTDC) based on the voltage-source converter (VSC) has developed rapidly in renewable and electric power systems. To reduce the copper loss of large capacity and long distance DC transmission line, an improved droop control design based on optimal power sharing in VSC-MTDC integrating offshore wind farm i...

In recent years, the demand for copper and nickel has risen world-wide due to their use in printed circuit boards, batteries, application in marine alloys (due to excellent resistance to corrosion by seawater), and a wide range applications in day-to-day life (Doebrich, 2009). Increasing demand for these metals is leading to rapid depletion of high-grade resources. Alternative sources, such as ...

This thesis describes the design and construction of a 250 W, 35-60 Vin, 5 Vout dc-dc power converter with a switching frequency of 500 kHz. The converter uses square wave switching and is composed of two power processing stages in series. The first stage, a boost converter, regulates the output voltage of the converter. The second stage, a push-pull converter operating at 100% duty-cycle, prov...

Wearable thermoelectric generators (TEGs) harvest thermal energy generated by the body to generate useful electricity. The performance of these systems is limited by (1) the small working temperature differential between the body and ambient, (2) the desire to use natural air convection cooling on the cold side of the generator, and (3) the requirement for thin, lightweight systems that are com...