this paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

Copper nanoparticle based clay composite has been synthesized by in situ reduction of a copper ammonium complex ion and characterized by different analytical instruments. The copper nanoparticles were both intercalated and adsorbed on the surface with diameters of <5nm (for intercalated) and 25-30nm (for adsorbed). The composite showed good stability for over 3 months in air. Excellent antimicr...

copper matrix composite reinforced by 1wt.% tib2 particles was prepared using in situ reaction of cu-1.4wt.% ti and cu-0.7wt.% b by rapid solidification and subsequent heat treatment for 1-20 hrs at 900ºc. high-resolution transmission electron microscopy (hrtem) characterization showed that primary tib2 particles were formed in liquid copper. heat treatment of as-solidified samples led to the f...

In this work, copper micropillars and copper-carbon nanotube (CNT) composite micropillars were fabricated by incorporating an electrodeposition technique with a xurography process. In order to disperse carbon nanotubes in copper-CNT micropillars, various amounts of CNTs were added to the electroplating bath. Surface morphology and phase characterization of copper micropillars and copper-CNT com...

CrN/Cu composite powders were synthesized by employing a novel two-step technique. Firstly, the Cr2O3+CuO precursors were prepared by the solution combustion synthesis (SCS) method using cupric nitrate, urea, and chromium nitrate as initial materials. Subsequently, the SCS precursors were calcined at 850 °C in NH3 for 6 h, and transformed to CrN/Cu composite powders. The composite powders consi...

In this study, a novel multi-walled carbon nanotubes reinforced nanocrystalline copper matrix composite with super high strength and moderate plasticity was synthesized. We successfully overcome the agglomeration problem of the carbon nanotubes and the grain growth problem of the nanocrystalline copper matrix by combined use of the electroless deposition and spark plasma sintering methods. The ...

The aim of this study was to prepare three types of multiwall carbon nanotubes (CNT)-based composite electrodes and to modify their surface by copper electrodeposition for nonenzymatic oxidation and determination of glucose from aqueous solution. Copper-decorated multiwall carbon nanotubes composite electrode (Cu/CNT-epoxy) exhibited the highest sensitivity to glucose determination.

This paper presents and discusses issues relevant to solidification of a chosen lead-free solder, the eutectic Sn-3.5%Ag, and its composite counterparts. Direct temperature recordings for the no-clean solder paste during the simulated reflow process revealed a significant amount of undercooling to occur prior to the initiation of solidification of the eutectic Sn-3.5%Ag solder, which is 6.5 C, ...