an understanding of the strength of rice grains as affected by moisture content and temperature is important for analysis and prediction of cracking and/or breakage behavior during handling and processing. further, the magnitude of these properties at various moisture contents and temperatures is needed for the accurate design of milling machinery so that grain damage is minimized. to determine...

an oil and gas well cementing in gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in maroon field. the main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. unlike conventional cem...

This paper presents the findings of a study on solidification/stabilization (S/S) of lead-contaminated soil using ordinary Portland cement (OPC) and rice husk ash (RHA). The effects of varying lead concentrations (in the form of nitrates) in soil samples on the physical properties of their stabilized forms, namely unconfined compressive strength (UCS), setting times of early mixtures and change...

the aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. two types of sandwich composites with e-glass/kevlar/polyester resin facings and end-grain balsa wood as core have been produced by vacuum infusion processing (vip) and hand-lay up (hl) method. compression tests on...

The compressive properties of human enamel and dentin have been reported by Stanford, Paffenbarger, Kumpula, and Sweeney.' The elastic modulus of occlusal, side, and cusp enamel was reported to be 1.8, 6.0, and 8.2 X 106 psi, respectively. The corresponding values for the proportional limit were 16,800, 21,000, and 34,200 psi and, for the compressive strength, 19,400, 28,300, and 40,200 psi. An...

this study experimentally investigates the effect of multi-walled carbon nanotubes (mwnt’s), as a reinforcing material, on the physical properties of heavy-weight oil well cements. a candidate well is selected and the properties of the cement slurry used in a problematic section of the well are tested in the laboratory. carbon nanotubes (cnt’s) are added as fibers to the cement slurry and the i...

Novel syntactic foams made of starch and ceramic hollow micro-spheres were developed. Foams of four different micro-sphere size groups were manufactured with either preor post-mould gelatinisation process. Compressive failure behaviour and mechanical properties were evaluated. Not much difference in failure behaviour or in mechanical properties between the two processes (preand post-mould gel) ...