in this paper, a new analytical method is proposed to study the effect of crack and axial load on vibration behavior and stability of the cracked columns. using the local flexibility model, the crack has been simulated by a torsional spring with connecting two segments of column in crack location. by solving governing eigenvalue equation, the effect of crack parameters and axial load on the nat...

This paper deals with an analytical approach to predict the nonlinear buckling behavior of functionally graded graphene-reinforced composite laminated cylindrical shells under axial compressive load surrounded by Pasternak’s elastic foundation in a thermal environment. Piece-wise functionally graded graphene-reinforced, composite layers are sorted with different types of graphene distribution. ...

methods are proposed to develop idealized moment-curvature response curves of slender rectangular rc wall sections with uniformly distributed longitudinal reinforcement, using limit states, namely, cracking of concrete in tension, tensile yielding of reinforcement layers, and compression failure of concrete. it is recommended that tensile yielding of an inner layer of reinforcement is considere...

composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...

existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...

in fact the most suitable method for finding the load bearing capacity of a member under the axial load or axial load and bending is make use of the interaction diagrams. to analysis and design the hollow circular, square and rectangular high strength concrete (hsc) column shapes, a linear strain variation was assumed in the cross-section height of the members and then the static equilibrium eq...

BACKGROUND Compressive and quadriceps forces have been associated with noncontact anterior cruciate ligament (ACL) injury. The purpose of this study was to quantify the relative importance of each load component during noncontact ACL injury. HYPOTHESIS We hypothesized that the introduction of a quadriceps force lowers the axial compressive force threshold to produce ACL injury. STUDY DESIGN...

PURPOSE To conduct an in vitro strength test for the Joshi External Stabilising System (JESS) for stabilisation of tibial fractures using a cadaveric tibia and steel rods. METHODS The configuration of the JESS specimens was based on a 62-year-old man with a metaphyseal tibial fracture. Two types of JESS specimens were prepared, using either the tibia of an average male adult cadaver (n=1) or ...

The primary function of the disc is mechanical; therefore, degenerative changes in disc mechanics and the interactions between the annulus fibrosus (AF) and nucleus pulposus (NP) in nondegenerate and degenerate discs are important to functional evaluation. The disc experiences complex loading conditions, including mechanical interactions between the pressurized NP and the surrounding fiber-rein...