in this paper, numerical simulation of frp composite cylinder tubes progressive crushing processes is conducted using ls-dyna. details on the numerical modeling strategy are given and discussed. it is found that triggers introduced in the numerical simulation can effectively model the bevel trigger at the end of the tubular specimens. it is also found that two-layer finite element model based o...

In this paper, numerical simulation of FRP composite cylinder tubes progressive crushing processes is conducted using LS-Dyna. Details on the numerical modeling strategy are given and discussed. It is found that triggers introduced in the numerical simulation can effectively model the bevel trigger at the end of the tubular specimens. It is also found that two-layer finite element model based o...

In this paper the energy absorption capacity of stiffened circular composite tube is considered. The governing equations and dynamic equilibrium are first derived and then solved. Additionally, a finite element model of reinforced circular composite tube structure is modeled. At the following, the effects of various parameters such as structural geometry, number of rings and stingers on mechani...

this paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

Experiments are conducted in a shock tube to study the shock loading of a cylinder and a cylinder bank. The experiments model the loading of the cooling tubes in an inertial confinement fusion reactor where banks of tubes line the reaction chamber. The diffraction of the shock wave is visualized using shadowgraphy. Shock loading of the cylinder(s) is measured with flush mounted piezoelectric pr...

Single walled carbon nanotube (SWNT)/fabric composite materials were manufactured using two simple manufacturing processes. The first method is direct deposition of SWNTs by either a spray method or by incubation; the other is a Quasi-Langmuir–Blodgett (QLB) transfer technique. The composite retains high mechanical strength (governed by the fabric), and good electrical properties (determined by...

in this research, static stresses analysis of boron nitride nano - tube reinforced composite (bnntrc) cylinder made of poly - vinylidene fluoride (pvdf) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. the surrounded elastic medium is modelled by pasternak foundation. composite structure is modeled based on piezoelectric fiber reinforced composite (pfr...

assessing the behavior of composite structures which are subjected to impact loads is one of the important subjects in the field of mechanical sciences. using thin-walled tubes which collapsed and absorbed the impact energy is a well-known method to prevent damages to the other parts of the structures. in this paper, deformations, crushing length, peak load, mean force and energy absorption cap...

in this article, thermo-elastic-behavior of a thick-walled cylinder made from a polystyrene nanocomposite reinforced with functionally graded (fg) single-walled carbon nanotubes (swcnts) was carried out in radial direction while subjected to a steady state thermal field. the swcnts were assumed aligned, straight with infinite length and a uniform layout. two types of variations in the volume fr...