0

objective roughness is the main parameter in interlocking bonding mechanism. yet there is no model designed to evaluate the effect of surface roughness on adhesion of coating materials in pharmaceutical sciences. materials and methods in this study polymethyl metacrylate spherical beads with different sizes were poured into 10 mm mold, then it was pressed by hand screw and finally heated to 141...

the influence of increasing the sio2/k2o molar ratio on the electrochemical action of a waterbornepotassium silicate zinc-rich coating was investigated by means of electrochemical impedancespectroscopy (eis) and corrosion potential (ecorr) measurements. the eis results showed thatincreasing the sio2/k2o molar ratio in the range of 3.135 to 5 by the addition of nano-sio2 to theresins improved th...

Create three-dimensional network of siloxane polymer in the epoxy resin is an appropriate mechanical properties .Dispersion of nanoclay in these coating was prepared by ultrasonication method. Mechanical properties of nanocomposit coatings such as abrasion, hardness and adhesion was increased by addition of nanoclay montmorillonite. Different percentages of nanoclay in coating showed that even ...

Adhesion strength of exterior or interior coating of steel pipes is too important. Increasing of coating adhesion on surfaces can increase the life time of coating, safety factor of transmitting line pipe and decreasing the rate of corrosion and costs. Preparation of steel pipe surfaces before doing the coating process is done by shot and grit blasting. This is a mechanical way to do it. Some e...

in this paper , the effect of curing time and temperature as well as various primers on durability of high density polyethylene on plain carbon steel have been investigated. the aim is to increase adhesion, improve durability and also to produce a defect-free in order to improve the corrosion resistance of steel substrate. for this purpose, after surface preparation and applying a primer (zinc ...

epoxy powder coatings containing zinc aluminum phosphate (zap) and zinc phosphate (zp), which are the 2nd and 1st generation of phosphate-based pigments respectively, were applied to the surface of mild steel sheets. the anticorrosive performances of the coated samples were studied using electrochemical impedance spectroscopy (eis). cathodic disbonding resistance and the adhesion performance of...

Advancement in vacuum technologies and vapor deposition processes during last decades has led to the introduction of many modern coatings on metal cutting tools. Even in such an advanced vacuum coating techniques, the failure is not due to the wear of the coating but rather due to the lack of coating adhesion to the substrate. In this work, the coating adhesion test results were performed which...

Polypropylene (PP) has poor adhesion to metals and other surfaces for its chemical structure. Hence, chemical modification of PP is necessary for metal surface coating application. In this research, grafting of maleic anhydride (MA) onto co(propylene-b-ethylene) in the presence of a dicumyl peroxide (DCP) was accomplished in a single screw extruder. Characteristics of the modified polymer were ...