The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...

The technique of strengthening steel structures with Carbon Fibre Reinforced Polymer (CFRP) has attracted growing attention in research field and in practice and its environmental durability is of high importance. This paper describes an investigation on the bond characteristics between high modulus CFRP sheet and steel plates under elevated temperature exposures. Tensile tests were carried out...

in this paper, the effect of cyclic loading on punching strength of flat slabs strengthened with carbon fiber reinforced polymer (cfrp) sheets is studied. experimental results of ten slab specimens under monotonic and cyclic loading are analyzed. eight specimens were strengthened with cfrp sheets on the tensile face of the slabs and the two other specimens were kept un-strengthened as control s...

The two Non-Destructive Evaluation [ NDE ] techniques viz., Air Coupled Ultrasonic [ACU ] and Pulsed Thermography [PT ] find many applications in aerospace industry . These NDE techniques can be used for debond detection in spacecraft structural components like honeycomb sandwich deck plates, shear web panels and central cylinder made of aluminum core and composite face sheets. The Air coupled ...

The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...

the use of unbounded tendons is common in prestressed concrete structures and evaluation of the stress increase in unbonded tendons at ultimate flexural strength of such structure has posed a great challenge over the years. based on the bending experiment for two-span continuous post-tension beams with unbounded tendons and externally applied cfrp sheets, the monitoring of the stress increment ...

the effect of steel plate thickness on the repair effectiveness of rc beam is presented in this paper. a total of four beams were tested, one beam repaired by cfrp with a thickness of 1.2 mm and used as a control beam, and three beams repaired by a steel plate. steel plates with a thickness of 2 mm, 3 mm, and 4 mm were used in repairing the beams. the maximum load-carrying capacity, deflection ...

The current paper reviews existing design guidelines for strengthening beams in shear with carbon fibre reinforced polymer (CFRP) sheets and proposes a modification to Concrete Society Technical Report TR55. It goes on to present the results of an experimental programme which evaluated the contribution of CFRP sheets towards the shear strength of continuous reinforced concrete (RC) beams. A tot...

Carbon fiber reinforced polymer (CFRP) sheets can be externally bonded for retrofit of concrete structures, improving flexure and sheer strength in the concrete. The key to CFRP sheets is the bond to the concrete, as bond is the means to transfer stress between the tow sheet and the concrete. Experimentation has been conducted to test a current market fiber-resin system, and to develop a resin ...

The opinions, findings and conclusions expressed in this report are those of the principal investigator and the Missouri Department of Transportation. They are not necessarily those of the U. EXECUTIVE SUMMARY This report presents the results of a pilot study to apply externally bonded Carbon Fiber Reinforced Polymer (CFRP) sheets to strengthen a simple span reinforced concrete solid slab bridg...