In this work, ceramic hollow fiber supported polydimethylsiloxane (PDMS) composite membranes were developed by dip-coating PDMS layer on the surface of macroporous ceramic hollow fiber support. By controlling the properties of polymer solution and ceramic hollow fiber, high-quality ceramic hollow fiber supported PDMS composite membranes were fabricated for pervaporation (PV) recovery of biobuta...

For the first time, a ZIF-8 membrane was grown on the inner surface of a ceramic hollow fiber via cycling precursors. The inner-side hollow fiber ZIF-8 membrane exhibits good performance for recovering hydrogen.

membrane technology is used to separate water or solvents from salts or pollutants. this technique could be used for water treatment. for using of polyether sulfone (pes) hollow fiber membranes in water treatment processes, the pes hollow fiber membranes were prepared by dry-wet spinning method and heated in an oven at: 120°c, 150°c and 180°c. the effect of heating on performance of membranes w...

In this work, poly (ether-block-amide) (PEBA)/ceramic hollow fiber (HF) composite membranes with high flux were prepared by dip-coating the ceramic hollow fiber with PEBA polymer solution for pervaporation (PV). The membrane fabrication was optimized by finely tailoring the coating parameters such as the viscosity and concentration of PEBA coating solution, which made the pervaporation flux as ...

Ceramic−carbonate dual-phase membranes have attracted a lot of attention because of the emission of CO2 and environmental problems. In this study, a dense SrFe0.8Nb0.2O3−δ−carbonate dual-phase multichannel hollow fiber membrane has been successfully prepared via a phase inversion−sintering technique and impregnation. The morphology, crystal structure, phase stability, breaking load, and CO2 per...

A graphene oxide (GO) membrane is supported on a ceramic hollow fiber prepared by a vacuum suction method. This GO membrane exhibited excellent water permeation for dimethyl carbonate/water mixtures through a pervaporation process. At 25 °C and 2.6 wt % feed water content, the permeate water content reached 95.2 wt% with a high permeation flux (1702 g m(-2) h(-1)).

a membrane bioreactor (mbr) system based on a dead-end immersed hollow fiber membrane and filamentous fungus aspergillus oryzae were used for treatment of baker’s yeast wastewater. the fungus was adapted to the wastewater in the bioreactor for two weeks before starting the continuous process. average organic loading rate of 4.2 kg cod/m3.d was entered the bioreactor. mbr system was able to redu...

Pervaporation membrane technology plays an important role in production of renewable bio-fuels. To improve the separation performance of polymeric membranes, an effective approach is development of mixed-matrix membranes containing high-performing fillers such as metal-organic frameworks. Towards practical application, hollow fiber could be an ideal substrate for mixed-matrix composite membrane...

this study focuses on the preparation and modification of a thin-film composite (tfc) hollow fiber polyamide membrane fabricated by the interfacial polymerization of piperazine (pip) and trimesoyl chloride (tmc) on a porous polysulfone substrate. the effects of triethylenetetramine (teta) and silica nanoparticles (sio2) contents in the aqueous phase (as the additives) on the morphology and perf...