ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(pan)-based carbon fiber. the surface characteristics of carbon fibers were characterized by x-ray photoelectron spectroscopy (xps). the interfacial properties of carbon fiber reinforced polyamide 6 (cf/pa6) composites were investigated by means of the single fiber pull-out tests. as a result, it...

Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...

Conventional carbon fiber reinforced phenolic resins are widely used to prepare carbon/carbon composites due to their high carbon yield. Property enhancement of carbon fabric/phenolic composites is possible through carbon nanomaterial dispersion in the matrix. The effect of carbon nanofiber dispersion in phenolic resins/carbon fabric composites was investigated. The dispersion efficiency in dif...

in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...

In past decades, carbon–carbon composites composed of multidirectional carbon fiber reinforcement embedded in carbon matrix have been significantly explored due to its excellent mechanical and physical properties. Carbon-carbon composites have light weight, high strength at high temperature in non-oxidizing atmospheres, low coefficient of thermal expansion, high electrical conductivity and high...

this research investigates the effect of the post-cure time on the residual stresses in laminated composites. laminated composites were made of t300 carbon fibers and epoxy resin. the post-cure process was carried out at the constant temperature of 120 °c for 6 and 12 hours for two specimens. the slitting method was employed to determine through-thickness residual stress distribution of the com...

This paper investigated the moisture absorption, mechanical behavior and the dielectric performance of hybrid and non-hybrid polymeric composites. Hand lay-up technique was used for processing carbon; glass reinforced polyester resin composites (non-hybrid) and carbon-glass/polyester hybrid composites with various fiber configurations. The maximum resistance of water absorption was obtained for...