One significant factor in the operation of a fluidized bed combustor is the manner in which coal particles disperse and mix with the bed material upon entering the bed. A thermal tracing technique was used to study the mixing characteristics in a 1/4 scale model of a pressurized bubbling fluidized bed combustor. Particles cooled by liquid nitrogen are injected into the bed in the same way that ...

Two-interconnected fluidized bed systems are widely used in various processes such as Fisher-Tropsch, hot gas desulfurization, CO2 capture-regeneration with dry sorbent, chemical-looping combustion, sorption enhanced steam methane reforming, chemical-looping hydrogen generation system, and so on. However, most of two-interconnected fluidized beds systems require riser and/or pneumatic transport...

the local solid flow structure of gas-solid bubbling fluidized bed was investigated to identify and characterize the particle clusters. extensive mathematical calculations were carried out using the energy-minimization multi-scale (emms) approach for evaluating cluster properties including the velocity, the size and the void fraction of clusters in the dense phase of the bed. the results showed...

The local solid flow structure of gas-solid bubbling fluidized bed was investigated to identify and characterize the particle clusters. Extensive mathematical calculations were carried out using the energy-minimization multi-scale (EMMS) approach for evaluating cluster properties including the velocity, the size and the void fraction of clusters in the dense phase of the bed. The results showed...

The influence of internal tubes present in the fluidized bed on its hydrodynamic behavior was examined in this study. One tube was completely immersed in the bed of 650 m glass beads at 10 cm above the air distributor in the 15 cm inner diameter fluidized bed column of aspect ratio 1. The pressure fluctuations signal was collected over 300 s and was consequently analyzed by the both statistical...

Fluidized beds have been widely used in power generation and in the chemical, biochemical, and petroleum industries. The 3D simulation of commercial scale fluidized beds has been computationally impractical due to the required memory and processor speeds. However, in this study, 3D Computational Fluid Dynamics simulation of a gas-solid bubbling fluidized bed is performed to investigate the effe...

The paper presents the method of on-line diagnostics of the bed temperature controller for the fluidized bed boiler. Proposed solution is based on the methods of statistical process control. Detected decrease of the bed temperature control quality is used to activate the controller self-tuning procedure. The algorithm that provides optimal tuning of the bed temperature controller is also propos...

The transient bubble behavior was experimentally investigated to fundamentally understand the transient motion of gas bubbles in freely bubbling fluidized beds, simulating the FBC systems. Due to the oversimplified traditional two phase flow model concepts developed and most of the related numerous experimental works from 1960s to 1980s, the transient bubble behaviors could not have received du...

Fluidized bed techniques are employed in coal combustion power plants, because they allow for the use of low-quality fuel and result in low pollutant emissions. The most important dynamical difference between fluidized beds and normal combustion chambers, is that the former are characterized by a significant loading of carbon, usually absent in conventional plants. Fluidized beds are remarkably...