sudden fracture is one of the major failure modes in brittle materials. plexiglass (polymethyl methacrylate) is a well known brittle polymer, widely used in various industries. many types of notches, particularly v-shaped notches, are sometimes used in the components made of plexiglass. these notches can dramatically decrease the load bearing capacity of components due to the concentration of s...

The object of this investigation was to gain a better understanding of the flow and fracture propensity of steel plates in which the Wells-type notch served as the fracture initiator. This type of notch is of importance in experimental investigations of the brittle fracture phenomenon because it successfully initiates low-stress brittle fractures in the wide-plate specimen in which it is used. ...

fast fracture is one of the major failure modes in brittle polymers. generally, crack growth in these polymers may occur under combined tensile-shear loading. however, the fracture test data reported previously for some dental restorative resins can not be predicted by using the available fracture criteria.in this paper, a modified fracture criterion is used for estimating the fracture load for...

In this work, additional input is provided into the ongoing discussion on the mechanisms, causes and remedies of brittle fracture failures of composite (non-ceramic) insulators. This has been done partially to complement the recently published article on this topic entitled “ IEEE Task Force Report: Brittle Fracture in Non-Ceramic Insulators” [1]. At first, the most important characteristics of...

This letter describes a newly discovered phenomenon: ductile fracture in cementitious materials. The brittle nature of materials such as concrete and ceramics has prompted the development of various approaches to enhance their fracture toughness. Fibre reinforcement has been the common focus in the toughening of the brittle materials. Two types of fracture have been observed to date in cementit...

We report a brittle Mg-based bulk metallic glass which approaches the ideal brittle behavior. However, a dimple structure is observed at the fracture surface by high resolution scanning electron microscopy, indicating some type of "ductile" fracture mechanism in this very brittle glass. We also show, from the available data, a clear correlation between the fracture toughness and plastic process...

The aim of the present paper is a systematic elaboration of a three dimensional finite element analysis tool for discontinuous fracture in brittle solids. Brittle or quasi-brittle fracture usually occurs when a material reaches the limit of its strength and no plastic deformation has been observed prior to failure. In this novel approach, this kind of failure is characterized by three sets of g...

The study of mechanical behavior of the structural steel S400 under quasi- static and dynamic loading has been the subject of this investigation. In oder to obtain different stress - triaxiality conditions the specimens were notched with 1, 1.5, 2 and 3.5 mm notch radius. The results of fractography show as the velocity of tension increases, ductility reduces and a ductile-brittle transition oc...

the basic trait in the ceramics is their high brittle or low fracture toughness, and the main criteria in the design and application is specifying the fracture toughness in ceramics. in this paper, a new method is proposed to determine the fracture toughness of ceramics, which is enhanced in lowering the cost of fracture toughness determination relative to the previous methods. hence due to the...