one of the methods to reduce the emissions in a diesel engine is by oxygen introduction into the combustion chamber which can be done by supplying the oxygen into the inlet manifold during suction stroke. oxygen affects different parameters such as brake thermal efficiency, fuel consumption, nox and smoke at different load conditions. load test was conducted for various concentrations of oxygen...

This paper presents the technical performance measurements of biogas premixed charge diesel dual fuelled engine. A 4-stroke research diesel engine was used for the performance analysis. The performance parameters like engine brake power, brake specific fuel consumption, volumetric efficiency and brake thermal efficiency were measured and compared with conventional diesel with different proporti...

aIn the present study a 4-stroke 5hp diesel engine was tested with Diesel oil plus cottonseed oil blends. The blends in different proportions (10 to 50 percent by volume) were tested at constant speed of 1500 rpm. The said engine is operated at different loads and characteristics like Brake power, Brake thermal efficiency, specific fuel consumption etc. Engine performance for blends resulted in...

in this paper, the amount of wasted heat from different parts of a 12 liter compression ignition engine and their potential for waste heat recovery were investigated. then, two-stage configuration of organic rankine cycle was introduced for simultaneous heat recovery from exhaust gases and coolant. finally, parameters like hybrid generated power, engine thermal efficiency and brake specific fue...

an ever-increasing drift of energy consumption, unequal geographical distribution of natural wealth and the quest for low carbon fuel for a cleaner environment are sparking the production and use of biodiesels in many countries around the globe. in this work, jatropha and karanja biodiesels were produced from the respective crude vegetable oils through transesterification, and the different phy...

Vegetable oils are renewable in nature and can be directly used as fuels in diesel engines. However, their high viscosity and poor volatility lead to reduced thermal efficiency and increased hydrocarbon, carbon monoxide and smoke emissions. Transesterification is one of the methods by which viscosity could be drastically reduced and the fuel could be adopted for use in diesel engine. This Ester...

An ever-increasing drift of energy consumption, unequal geographical distribution of natural wealth and the quest for low carbon fuel for a cleaner environment are sparking the production and use of biodiesels in many countries around the globe. In this work, jatropha and karanja biodiesels were produced from the respective crude vegetable oils through transesterification, and the different phy...

An ever-increasing drift of energy consumption, unequal geographical distribution of natural wealth and the quest for low carbon fuel for a cleaner environment are sparking the production and use of biodiesels in many countries around the globe. In this work, jatropha and karanja biodiesels were produced from the respective crude vegetable oils through transesterification, and the different phy...

AbstractStringent emission norms and environment degradation due to pollutants from the automotive vehicles lead us to find the suitable alternative for the petro-diesel. The oxygenated fuel used is dibutyl ether(DBE). While injection pressure is 200 bar and injection timing is 20.5 0 BTDC we get higher brake thermal efficiency and lower brake specific fuel consumption for DBE10 compare to diesel.

Experiments were carried out to evaluate the performance of a medium grade LHR diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown and air gap insulated liner with superni insert with different operating conditions of jatropha oil in crude from and biodiesel form with varied injection timing and injection pressure. Performance paramete...