TThis study investigated the water absorption of chitosan, collagen, and chitosan/collagen blend membranes exposed to gamma-ray irradiation. These membranes were produced via the solvent evaporation method. All membranes then underwent irradiation at 15 or 25 kGy gamma-ray doses, while membranes without irradiation were used as controls. After immersing the membranes in distilled water for up t...

Polyethersulfone (PES)-based anion exchange blend membranes were prepared from quaternized-PES (Q-PES) and N-Methyl-2-pyrrolidone (NMP) casting solutions with water as coagulant via non-solvent induced phase inversion. The compatibility of the blend system was investigated through thermodynamic studies while membrane formation was determined using the cloud point techni...

In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via thermally induced phase separation (TIPS) method and their fouling behaviors were examined using filtration of BSA protein. Membranes were characterized using FESEM, AFM, ATR-FTIR analyses and porosity measurement. Fouling behavior of membranes was analyzed using the resistance-in-series (RIS), classic and combine...

Homogeneous membranes were prepared by blending poly (acrylic acid) with poly (vinyl alcohol). These blend membranes were evaluated for the selective separation of alcohols from toluene by pervaporation. The flux and selectivity of the membranes were determined both as a function of the blend composition and of the feed mixture composition. The results showed that a polymer blending method coul...

Membrane separation is known as an efficient technique for the oily wastewater treatment. Therefore, in the present study, sulfonated poly (ether ether ketone) (SPEEK) was introduced into the polysulfone (PSF) solution in order to enhance the hydrophilicity and the membrane structure for the oil–water separation. The hollow fiber membranes were fabricated via a phase-inversion process. The memb...

In the present study, the permeabilities of CO2 and CH4 in terms of ideal and actual CO2/CH4 selectivity were investigated through the synthesized membranes of poly (ether-block-amide) (Pebax 1657) accompanied with poly (ethylene glycol) (PEG 400) and NH2-MIL125 nanoparticles. NH2-MIL125 nanofillers were added to the blend of PEG...

Blend membranes of chitosan and poly (ethylene oxide) with different molecular weights of 100,000 and 600,000 were prepared by the solution cast technique. The Chitosan-PEO blend membranes were produced to study their water adsorptions capacity and characteristics of the haemodialysis membrane application. An increase in the water adsorption capacity of chitosan-PEO blend membranes compared to ...

Polyvinyledenefluoride–polystyrene (PVDF/PS) blend ultrafiltration membranes were prepared using phase inversion technique. Casting solutions were prepared with different compositions of polyvinylidene fluoride (PVDF) and polystyrene (PS) both in the presence and absence of the additive, polyvinylpyrolidone (PVP) using dimethylacetamide as solvent. The effects of compositions of PS and concentr...

Blend reverse osmosis membranes were fabricated using polyvinyl chloride (PVC) with cellulose acetate (CA) as polymer blends. Tetrahydrofuran (THF) and N-Methyl-2-pyrrolidone (NMP) were used as solvents. The membrane polymer solution was cast on a coated woven fabric support material. The prepared membranes have been characterized by SEM and mechanical properties. SEM r...