the objective of this research is to investigate the effect of four additives including iron slag (is), works debris (wd), fly ash (fa), and lime kiln dust (lkd) on the biochemical properties of biosolids produced at mangere wastewater treatment plant (mwwtp), auckland, new zealand. all these additives are homogenously mixed in the laboratory with biosolids at various percentages with and witho...

the objective of this research is to investigate the effect of four additives including iron slag (is), works debris (wd), fly ash (fa), and lime kiln dust (lkd) on the biochemical properties of biosolids produced at mangere wastewater treatment plant (mwwtp), auckland, new zealand. all these additives are homogenously mixed in the laboratory with biosolids at various percentages with and witho...

Removal of enzyme inhibitors released during lignocellulose pretreatment is essential for economically feasible biofuel production. We tested bio-abatement to mitigate enzyme inhibitor effects observed in corn stover liquors after pretreatment with either dilute acid or liquid hot water at 10% (w/v) solids. Bio-abatement of liquors was followed by enzymatic hydrolysis of cellulose. To distingui...

reaction constants and heat release during thermophilic aerobic digestion of typical secondary and mixed sludges were determined. maximum reaction constant, determined by measuring the amounts of biodegradable volatile suspended solids (bvss) removed, occurred in the temperature range of 55-60 ºc. measurement of heat releases were carried out, at the same range, by the aid of a temperature prog...

Reaction constants and heat release during thermophilic aerobic digestion of typical secondary and mixed sludges were determined. Maximum reaction constant, determined by measuring the amounts of biodegradable volatile suspended solids (bVSS) removed, occurred in the temperature range of 55-60 ºC. Measurement of heat releases were carried out, at the same range, by the aid of a temperature ...

Bio-methane potential (BMP) tests are widely used in studies concerning the anaerobic digestion of organic solids. Although they are often criticized to be time consumer, with an average length longer than 30 days, such tests are doubtless easy to be conducted, relatively inexpensive and repeatable. Moreover, BMP tests give significant information about the bio-methanation of specific substrate...

Finite element methods are used in various areas ranging from mechanical engineering to computer graphics and bio-medical applications. In engineering, a critical point is the gap between CAD and CAE. This gap results from different representations used for geometric design and physical simulation. We present two different approaches for using subdivision solids as the only representation for m...