We synthesized Bi/Bi2O3 heterojunction nanoparticles at various substrate temperatures using the pulsed laser deposition (PLD) technique with a pulsed Nd:YAG laser. The Bi/Bi2O3 heterojunction nanoparticles consisted of Bi nanoparticles and Bi2O3 surface layers. The average diameter of the Bi nanoparticles and the thickness of the Bi2O3 surface layer are linearly proportional to the substrate t...

Bismuth oxide directly grown on nickel foam (p-Bi2O3/Ni) was prepared by a facile polymer-assisted solution approach and was used directly as a lithium-ion battery anode for the first time. The Bi2O3 particles were covered with thin carbon layers, forming network-like sheets on the surface of the Ni foam. The binder-free p-Bi2O3/Ni shows superior electrochemical properties with a capacity of 66...

We prepared an α-Bi2O3/BiOBr core-shell heterojunction via a facile in situ chemical transformation method. Ultrathin BiOBr nanosheets were observed and these were found to be evenly distributed on the surface of α-Bi2O3/BiOBr by SEM and TEM. The results revealed that the prepared α-Bi2O3/BiOBr photocatalysts were porous, and their specific surface areas were found to be raised on comparing wit...

Bismuth oxide (Bi2O3) nanorods was prepared via one pot sol-gel method using Bi(NO3)3.5H2O and starch (as template) in water under hydrothermal condition followed by calcination at 320˚C within 3 h. The resultant solid product was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetry (TGA), and FTIR techniques. Based on the obtained results, the formatio...

Based on a facile vapor-phase transport method without any catalyst and template, one-dimensional single-crystalline bismuth oxide (Bi2O3) micro/nanoribbons were fabricated on silicon substrates in large quantities and morphology-controlled fabrication of Bi2O3 was achieved from a single precursor. The widths of Bi2O3 ribbons varied from 0.2 to 20 microm depending on the deposition temperatures...

in the present work, zno/bi2o3, sno2/bi2o3/bi2o4 mixed oxide, bi2o3 rod-like and sno2 nanoparticle have been synthesized. the obtained samples were characterized by field emission scanning electron microscopy (fe-sem) and x-ray diffraction (xrd). the optical properties of samples were evaluated by uv-vis spectrophotometer. the photocatalytic activity of samples was evaluated by decolorization o...

Bismuth oxide (Bi2O3)-doped yttria-stabilized zirconia (YSZ) were prepared via the solid state reaction method. X-ray diffraction and electron diffraction spectroscopy results indicate that doping with 2 mol% Bi2O3 and adding 10 mol% yttria result in a stable zirconia cubic phase. Adding Bi2O3 as a dopant increases the density of zirconia to above 96%, while reducing its normal sintering temper...

This work is a culmination of several corresponding studies designed to probe the initiation and reaction of aluminum nanothermite systems. The main diagnostic tool used in this study is a Temperature-Jump/Time-of-Flight Mass Spectrometer (T-Jump/TOFMS), which uses a filament heating method capable of very high heating rates up to 106 oC/s, while spectra are simultaneously obtained at a time re...

New data are presented on the phase equilibria and crystal chemistry of the binary systems CaO-Bi2O3 and CaO-CuO and the ternary CaO-Bi2O3-CuO. Symmetry data and unit cell dimensions based on single crystal and powder x-ray diffraction measurements are reported for several of the binary CaO-Bi2O3 phases, including corrected compositions for Ca4Bi6O13 and Ca2Bi2O5. The ternary system contains no...

The cover picture shows the degradation of the model dye rhodamine B (RhB) in water using b-Bi2O3 nanoparticles as photocatalyst, which was prepared from preorganized bismuth oxido clusters. In the background, a homemade photoreactor for in situ studies is shown, including the decolorizing process of the aqueous RhB solution as observed during visible light irradiation. The catalytic cycle show...