in this research iron manganese oxide nanocomposites were prepared by co-precipitation, sol-gel and mechanochemical methods by using iron (iii) nitrate, iron (ii) sulfate and manganese (ii) nitrate as starting materials. these nanocomposites were prepared in the presence of various catalyst beds. the polyvinyl pyrrolidon (pvp) was used as a capping agent to control the agglomeration of the nano...

this work is focused on synthesis of sio2- cnt hybrides via sol-gel method. homogeneous distribution of carbon nanotubes within silicon matrix was obtained by mixing the functionalized carbon nanotube (cntcooh) with active silicic acid followed by titration to the solution of sodium silicate (na2sio3) under the average temperature condition of 80?c. different ratios of multi-walled carbon nanot...

The specific surface area as determined by BET analysis is often used for scaling mineral surface reaction capacities and rates between particles of different sizes as found in nature. Generally, an inverse proportionality between BET area and particle size is assumed, based on geometry. However, macroscopic laboratory studies of mineral surface reactions generally employ crushed material that ...

preparation of 2-chlorobenzonitrile, and benzonitrile are reported here from the corresponding 2-chlorobenzaldehyde and benzaldehyde by the reaction of ammonium hydroxide/vpo titania, vpo bulk (ammonium metavanadate) cucr catalyst/air system in methanol. all these catalysts showed better conversions with reasonable selectivity to aromatic. the results prove that bet surface area results show vp...

This paper describes the adsorption of two organic (acetic and citric) acids on the blast furnace sludge, a representative by-product of the steelmaking industry. By PIXE, XRD, BET and SEM methods, it was shown that blast furnace sludge is a complex heterogeneous material with a specific surface area of s = 31.46 m g, composed mainly of amorphous phase (w = 76.2 %), calcite (w = 9.9 %), magneti...

A new mesoporous MOF, Zn4O(bpdc)(btctb)(4/3) (DUT-32), containing linear ditopic (bpdc(2-); 4,4'-biphenylenedicarboxylic acid) and tritopic (btctb(3-); 4,4',4''-[benzene-1,3,5-triyltris(carbonylimino)]tris-benzoate) linkers, was synthesised. The highly porous solid has a total pore volume of 3.16 cm(3) g(-1) and a specific BET surface area of 6411 m(2) g(-1), adding this compound to the top ten...

Gelation of tannin-formaldehyde (TF) solutions was systematically investigated by changing pH and concentration of TF resin in water. In this way we constructed the TF phase diagram, from which chemical hydrogels could be described, and also synthesized thermoreversible tannin-based hydrogels. Conditions of non-gelation were also determined. Hydrogels were dried in supercritical CO2, leading to...

In this study, two new Ni/La-Al2O3 catalysts were prepared by a sol-gel method, with different aluminium precursors (aluminium triisopropoxide and aluminium nitrate). The catalysts were characterized by scanning electron microscope (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), BET specific surface area, and particle size analysis (PSA) techniques. The BET results showed that the par...

High surface area porous poly(phenylene butadiynylene) networks were obtained (BET surface area up to 842 m(2) g(-1)) by the palladium-catalyzed homocoupling of 1,3,5-triethynylbenzene and 1,4-diethynylbenzene.