In this research, dynamic analysis of the rotational slender axially moving string is investigated. String assumed as Euler Bernoulli beam. The axial motion of the string, gyroscopic force and mass eccentricity were considered in the study. Equations of motion are derived using Hamilton’s principle, resulting in two partial differential equations for the transverse motions. The equations are ch...

The axial force measurement plays important role in tool designing and identification of its restrictions. Also, it is vital in design of machine mechanism and optimization of welding process parameters. In this study, a friction stir welded butt join on AA7075-T651 aluminum alloy plate is investigated. With change of some parameters, factors including axial force, mechanical properties, microh...

The characteristics of the axial flow within the core of a concentrated line vortex are investigated using molecular tagging velocimetry (MTV). A well-defined array of isolated vortices of alternating sign is generated in the wake of a NACA-0012 airfoil pitching sinusoidally at small amplitude and high reduced frequencies. The circulation and peak vorticity of the vortices are varied by the cho...

in this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3d finite element modeling and experimental tests. the structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...

Effect of time dependent normal transpiration on the problem of unsteady viscous flow and heat transfer in the vicinity of an axisymmetric stagnation point of an infinite circular cylinder moving simultaneously with time-depended angular and axial velocities and with time-dependent wall temperature or wall heat flux are investigated. The impinging free stream is steady with a strain rate . A re...

Pressure and performance requirements of axial piston pumps and the proportion of churning losses in axial piston pumps increase significantly with increasing speed. To investigate the primary distribution of churning losses in axial piston pumps at various ranges of speed, a test rig was set up in which other friction losses can be eliminated, thus making it possible to investigate the net chu...

A controversial hypothesis has proposed that lizards are subject to a speed-dependent axial constraint that prevents effective lung ventilation during moderate- and high-speed locomotion. This hypothesis has been challenged by results demonstrating that monitor lizards (genus Varanus) experience no axial constraint. Evidence presented here shows that, during locomotion, varanids use a positive ...

The performance and imaging characteristics of ultrahigh speed ophthalmic optical coherence tomography (OCT) are investigated. In vivo imaging results are obtained at 850nm and 1050nm using different configurations of spectral and swept source / Fourier domain OCT. A spectral / Fourier domain instrument using a high speed CMOS linescan camera with SLD light source centered at 850nm achieves spe...

b = vortex spacing l = lateral displacement N = Brunt–Väisälä frequency q = root-mean-square turbulence velocity t = time u = axial velocity v = lateral velocity, vertical displacement V = aircraft ground speed w = descent speed, vertical wind velocity x = axial coordinate y = spanwise coordinate z = vertical coordinate = circulation = eddy dissipation rate = potential temperature = standard de...