نتایج جستجو برای: axial capacity
تعداد نتایج: 324119 فیلتر نتایج به سال:
The purpose of this study is to investigate bending moment and the axial load capacity of a pressurized pipe suffering from a through-wall circumferential crack repaired by a composite sleeve. The three-dimensional finite element method (FEM) was adopted to compute the results, and the failure assessment diagram (FAD) was employed to investigate the failure behavior of the repaired pipe. The fi...
physical modeling for study of deep foundations can be performed in simple chambers (1g), calibration chambers (cc), and centrifuge apparatus (ng). these common apparatus face certain limitations and difficulties. recently, frustum confining vessels (fcv) have been evolved for physical modeling of deep foundations and penetrometers. shaped as the frustum of a cone, this device applies steady pr...
Several deficient steel structural members require to be strengthened all over the world. In this article, horizontal defects were generated at three locations (top, middle, and bottom) on the middle element and the middle of the side element. Consequently, the effects of the location of such defects on axial behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened steel Square Hollow Se...
Strong vertical ground motions can significantly alter axial forces in a bridge column. Axial force variations also affect the concrete contribution to the shear capacity of a reinforced concrete (RC) member. However, the effect of axial force demands on shear capacity is a fairly complex issue since the shear demand in an RC bridge column is affected by variations in the axial force. A combine...
The result showed that the brittle failure was extinct, and the new-type shear walls had good deformability whose ductility factors were over 4.3. The axial compression ratio had significant influence on the mechanical properties of the new-type shear walls. As the increscent of the axial compression ratio, the shear capacity and initial stiffness were improved, but the energy-dissipating capac...
geometric and material nonlinear behavior of slender webs in i-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. in addition, the effects of flange and web slenderness rati...
composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...
This paper presents the application of the Artificial Neural Network (ANN) for prediction of axial capacity of a driven pile by adopting data collected from several projects in Indonesia and Malaysia. As many as 300 data were selected for this study. In this study, ANN was set and trained to predict the axial bearing capacity from high strain dynamic testing, i.e. Pile Driving Analyzer (PDA) da...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید