In material selection, especially in low temperature conditions, one of very important factors it is a ductile to brittle transition temperature, i.e. the temperature when material becomes too brittle to use. In this paper transition temperature determined by impact energy in temperature interval from –196 to +100°C of unalloyed austempered ductile iron with different microstructures have been ...

The components in top-fuel dragster and stock car engines undergo significantly more force than their production passenger vehicle counterparts do. Therefore, they must be manufactured and processed to withstand those forces so that they do not catastrophically fail while in service. In this project, the effects of austempering and adding a cryogenic processing step to the control quench and do...

Present investigations involve a systematic study on the machinability of austempered ductile irons (ADI) developed from four commercially viable ductile irons alloyed with different contents of 0, 0.1, 0.3 and 0.6 wt.% of Ni. The influence of Ni content, amount of retained austenite and hardness of ADI on machining behavior has been conducted systematically. Austempering heat treatment was car...

SUS440 is a high-carbon stainless steel, and its martensite matrix has high heat resistance, high corrosion resistance, and high pressure resistance. It has been widely used in mechanical parts and critical materials. However, the SUS440 martempered matrix has reliability problems in thin plate applications and thus research uses different austempering heat treatments (tempering temperature: 20...

in the present work, the effect of aluminum content, austenitizing temperature and austempering time and temperature on the mechanical properties and hardness of fe-c-al grey cast iron was investigated. for this purpose, three alloys containing 1, 2 and 4 weight percent of aluminum were provided. the tensile samples were austenitized at 850?c and 900?c for 120 min, followed by austempering proc...

The effect of heat treatment and alloying elements of copper and tin on the microstructure and mechanical properties of austempered ductile cast iron alloys is investigated. The austenitizing temperature of 890°C, the isothermal transformation (austempering) temperatures of 285, 335 and 375°C, and austempering times of 15, 30, 75 and 150 minutes are studied. The alloying elements of copper and ...

The development of nano/ultrafine bainitic structure in AISI 52100 steel was the goal of this study. For this purpose,the AISI 52100 the specimens were austenitized at 1050 °C for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. The austempered samples were characterized using field emissionscanning electron microscopy (FESEM), X-ra...

The development of ultrafine bainitic structure in AISI 431 stainless steel was the goal of this study. For this purpose, the AISI 431 specimens were austenitized at 1100 °C for 60 min followed by low-temperature austempering treatment at different temperatures and times. Austempered samples were characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (X...

The microstructural evolution and properties for varied austempering routes are investigated in a cold-rolled bainitic steel. Special attention is given to the effect of retained austenite (RA) terms its fraction, carbon concentration, morphology resulting from different on mechanical stretch flangeability. Bimodal sized laths provided, concentration RA maintains highest value through two-step ...

This paper examines the influence of austempering and shot peening on wear resistance ductile iron. Samples for further testing were made from mechanically processed casts. The hardness microstructure iron examined prepared samples. Metallographic analysis cast samples in state determined pearlitic-ferritic structure matrix characteristic this type Pearlite predominates structure, rest consists...