Austempered ductile iron (ADI) has been proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness combined with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields the optimum microstructure for a given chemical composition. The heat treating of the ductile cast iron produces th...

master moulds are used to cast copper anode moulds. these iron moulds are made of grey or nodular cast irons. according to desirable properties of ductile irons, it was expected that ductile cast iron moulds could have performed their nominal life. but in service, these moulds have not performed their nominal life and they have experienced premature failures due to warping and cracking. also gr...

Crack initiation and growth behaviour of an austempered ductile iron (ADI) austenitised at 800C and austempered at 260C has been assessed under three point bend fatigue conditions. Initiation sites have been identified as carbides remaining from the as cast ductile iron due to insufficient austenisation. The number of carbides cracking on loading to stresses greater than 275 MPa is critical in ...

the influence of aluminium on the microstructure of austempered ductile cast iron (adi) has been studied. anumber of irons of different compositions have been made by green sand casting and gravity die casting ofappropriate design to provide the experimental materials. austenitising was carried out at different temperaturesand holding times for a variety of experimental irons to achieve suffici...

The effect of heat treatment and alloying elements of copper and tin on the microstructure and mechanical properties of austempered ductile cast iron alloys is investigated. The austenitizing temperature of 890°C, the isothermal transformation (austempering) temperatures of 285, 335 and 375°C, and austempering times of 15, 30, 75 and 150 minutes are studied. The alloying elements of copper and ...

The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. A number of irons of different compositions have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. Austenitising was carried out at different temperatures and holding times for a variety of experimental irons to achieve suff...

Near Net Shape (NNS) manufacturing produces the engineering components closer to its final specification in single stage or minimum number of stages. ADI process technology is one of the NNS manufacturing technologies, currently being followed by the industries for manufacturing of engineering components at competitive price. Austempered Ductile Iron is a new class of engineering material which...

Amatikulu Sugar Mill has installed Austempered Ductile Iron (ADI) block links and side plates on two diffuser chain strands. These links were cast in South Africa at a substantially lower cost than forged chain links. Some development emerged concerning the pattern, casting procedures and quality assurance required to ensure that high quality links were produced. Extensive tests were performed ...

Master moulds are used to cast copper anode moulds. These iron moulds are made of grey or nodular cast irons. According to desirable properties of ductile irons, it was expected that ductile cast iron ...

The influence of the austempering temperatures on microstructure and mechanical properties austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite iron, which owing to higher strength elongation, exceeds conventional spheroidal iron. Such a combination achieved by heat treatment through austenitization, followed at different temperatures. austenitization conditions were sa...