in this study, a novel method called “atmospheric pressure solution evaporation (apse)” wasdeveloped for growing of zinc oxide (zno) nanostructures on al2o3 surface. zinc acetate dihydrate,polyvinyl pyrrolidone, and deionized water were used as precursor, capping, and solvent, respectively.the growth of zno nanostructures from evaporated solution was performed at three temperatures of300, 400, ...

In this study, a novel method called “atmospheric pressure solution evaporation (APSE)” wasdeveloped for growing of Zinc Oxide (ZnO) nanostructures on Al2O3 surface. Zinc acetate dihydrate,Polyvinyl Pyrrolidone, and deionized water were used as precursor, capping, and solvent, respectively.The growth of ZnO nanostructures from evaporated solution was performed at three temperatures of300, 400, ...

We experimentally investigate the Leidenfrost effect at pressures ranging from 1 to 0.05 atmospheric pressure. As a direct consequence of the Clausius–Clapeyron phase diagram of water, the droplet temperature can be at ambient temperature in a non-sophisticated lab environment. Furthermore, the lifetime of the Leidenfrost droplet is significantly increased in this low pressure environment. The ...

When a polymer solution with volatile solvent is exposed to open air, an elastic layer (called a skin) is often formed at the surface of the solution due to evaporation of the solvent. After such a skin is formed, further extraction of the solvent from the solution caused by evaporation has generally been considered to reduce the pressure in the solution. We have found that, in PMMA/acetone dro...

Electrospraying is a simple and versatile technique capable of producing polymeric particles. However, most investigations carried out thus far have been performed at ambient atmospheric pressure without studying the influences of pressure on the formation of polymeric particles. Here, we report our investigation on the effects of varying the pressure and the solution concentration on the micro...

We investigated the effects of the rate of solvent removal by varying ambient pressure at a fixed temperature on the morphology, particle sizes, drug encapsulation efficiency and releases pattern of lidocaine loaded poly-L-lactatide (PLLA) and poly-D,L-lactatide (PDLLA) microspheres, prepared with O/W emulsion–solvent evaporation process. Prepared in the fast rate of solvent evaporation (FRSE) ...

objective:platycladus orientalis or thuja orientalis is a native plant of iran different parts of which are used in the treatment of various diseases such as: gout, rheumatoid arthritis, common cold, cough, bronchitis, asthma, high blood pressure and hormonal disorders like hirsutism and baldness. also, various organs of this species have been used as appetizer. the purpose of this study was to...

In recent years, water (R718) as a kind of natural refrigerant—which is environmentally-friendly, safe and cheap—has been reconsidered by scholars. The systems of using water as the refrigerant, such as water vapor compression refrigeration and heat pump systems run at sub-atmospheric pressure. So, the research on water boiling heat transfer at sub-atmospheric pressure has been an important iss...

Introduction: Though Mars is a cold, dry planet, with respect to the thermal stability of liquid water at low altitudes it is not terribly different from comparably cold places on Earth [1]. In dry air such water would evaporate faster on Mars, at a rate comparable to a 60°C hot spring on Earth, but the heat loss associated with that evaporation would be mitigated by the poor thermal convection...