The objective of this study is to evaluate the rheological properties and chemical bonding of nano-modified asphalt binders blended with nanosilica. In this study, the nanosilica was added to the control asphalt at contents of 4% and 6% based on the weight of asphalt binders. Superpave binder and mixture tests were utilized in this study to estimate the characteristics of the nano-modifed aspha...

Basic oxygen furnace slag (BOF) is widely used in road construction, but there is a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA), containing stone mastic asphalt (SMA), porous asphalt (PA), and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag co...

Marshall Test design methods are used to design TLA modified asphalt mixture and base asphalt mixture respectively, and their pavement performance is tested. The results showed that there is a transforming coefficient of 1.15 between OAC of 40% TLA modified asphalt mixture and that of base asphalt mixture, and ultimate gradation of the TLA modified asphalt mixture is finer than previous gradati...

The basic oxygen furnace slag (BOF) was wide used in road construction, but there was a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA) containing stone mastic asphalt (SMA), porous asphalt (PA) and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag ...

BACKGROUND Asphalt workers are exposed to polyaromatic hydrocarbons (PAHs) from hot mix asphalt via both inhalation and dermal absorption. The use of crumb rubber modified (CRM) asphalt may result in higher exposure to PAHs and more adverse effects. Our aim is to assess occupational exposure to PAHs from conventional and CRM asphalt paving by measuring PAH metabolites in urine, and to investiga...

To solve the problem of rutting and fatigue damage to asphalt pavement, rutting and fatigue performances of Qingchuan rock asphalt modified asphalt were studied, based on the dynamic shear rheometer test, the dynamic creep test, the rutting test, the indirect tensile fatigue test, the small-sized acceleration loading test, the compressive resilient modulus test, the BISAR3.0 Program and the rut...

The conventional French fatigue test has yielded significantly different results for two asphalt materials with the same grade of pure asphalt. A research program was begun to study the influence of the asphalt nature on the fatigue behavior of asphalt materials. The program included full-scale experimentation on the circular test track of the Laboratoire Central des Ponts et Chaussees, laborat...

In road paving industry, asphalt emulsion is used for cold mix application such as chip seal, slurry seal, microsurfacing, cold recycled mixture and etc. Asphalt emulsion has several advantages compared to normal asphalt such as eco-friendly, easy to handle at ambient temperature and energy saving material because it does not need any heating process in its application. The history of asphalt e...

γ-(2,3-Epoxypropoxy)propyltrimethoxy silane surface modified layered double hydroxides (KH560-LDHs) were prepared and used to improve the ultraviolet ageing resistance of asphalt. The results of X-ray photoelectron spectrometry (XPS) indicated that KH560 has been successfully grafted onto the surface of LDHs. The agglomeration of LDHs particles notably reduced after KH560 surface modification a...

The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical savings, while reducing the negative environmental impact. The European research project PARAMIX aims to improve the techniques for hot mix recycling in plant and cold mix in situ recycling, so as to increase the amount of reclaimed asphalt and develop competitive road pavement rehabilitation te...