this research examines the behavior of soil-reinforced piles and applied loads based on the analytical method and by using the numerical results of flac3d software for comparison with the analytical results. the analysis was based on a method called virtual retaining wall, the following into consideration: an imaginary retaining wall that passes the footing edge the bearing capacity of footing ...

the pile-raft foundation is a combination of a raft foundation with piles. pile-raft foundation has been widely designed, assuming all structure loads to be transferred to piles without considering contribution of the load taken by contact surface between raft and soil. methods of analysis currently used in practice are based upon relatively conservative assumptions of soil behavior or on the l...

a simplified approach for nonlinear analysis of the load-displacement response of a single pile and a pile group is presented using the load-transfer approach. a hyperbolic model is used to capture the relationship between unit skin friction and pile-soil relative displacement developed at the pile-soil interface and the load-displacement relationship developed at the pile end. as to the nonlin...

Reducing the settlements of soft foundation effectively is a critical problem of high-speed railway construction in China. The new CFG pile-slab structure composite foundation is a ground treatment technique which is applied on CFG pile foundation and pile-slab structure composite foundation. Based on the experience of constructing Beijing-Shanghai high-speed railway in China, the settlement-co...

The results of an ongoing FEM parametric study are presented regarding the dependence of the resulting piled raft behavior under lateral load and combination of loads on pile diameter, pile length, arrangement of piles and raft thickness. Taguchi method with Analysis of Variance (ANOVA) was employed to calculate the contribution ratio of these factors on the lateral displacement of piled raft. ...

In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, &#10failure zone and plunging failure of p...

it is proposed to use a single base platform in the persian gulf considering its low depth and more appropriate environmental conditions in comparison to north sea and mexico gulf where this kind of platform is very popular. the pile of platform is responsible for transmission of environmental loads resulted from waves, currents, wind and dead loads to foundation of platform. using sacs 5.3 sof...

For the optimum design of Piled Raft Foundations (PRF), the concept of settlement reducer piles has been applied. However, when these piles are connected to the raft, a high stress may develop in the relatively small number of piles. Therefore, an alternative approach is to disconnect the piles from the raft forming a new system called a non-connected or disconnected piled-raft foundation (NCPR...

In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, failure zone and plunging failure of pil...