the narrow operating window between pore pressure and fracture pressure makes drilling difficult in some operations. a feasibility study of managed pressure drilling (mpd) is carried out on iran darquain oil field. the previous wells drilled in this field showed that mud returns were lost during drilling gadvan formation. the present work addresses this problem by means of surface back pressure...

Abstract In the paper, it is demonstrated how a Herschel–Bulkley fluid model, where parameters are selected from relevant shear rate range of flow and parametrically independent, can be used for pressure loss calculations. The model found to provide adequate predictions axial in an annulus inner cylinder does not rotate. It described one simplify slot approximation using (Founargiotakis model)....

Two-phase frictional pressure drop data were obtained for condensation of carbon dioxide in single horizontal micro tube of inner diameter ranged from 0.6 mm up to 1.6 mm over mass flow rates from 2.5*10 to 17*10 kg/s and vapor qualities from 0.0 to 1.0. The inlet condensing pressure is changed from 33.5 to 45 bars. The saturation temperature ranged from -1.5 C up to 10 C. These data have then ...

In this first part of a two-part study, experiments were performed to investigate condensation of FC-72 along parallel, square micro-channels with a hydraulic diameter of 1 mm and a length of 29.9 cm, which were formed in the top surface of a solid copper plate. The condensation was achieved by rejecting heat to a counter flow of water through channels brazed to the underside of the copper plat...

0894-1777/$ see front matter 2010 Elsevier Inc. A doi:10.1016/j.expthermflusci.2010.12.007 ⇑ Corresponding author. Tel.: +91 44 2257 4154. E-mail address: [email protected] (A.R. Balakrishna The effect of tube diameter on two-phase frictional pressure drop was investigated in circular tubes with inner diameters of 0.6, 1.2, 1.7, 2.6 and 3.4 mm using air and water. The gas and liquid superficial...

Magnetohydrodynamic(MHD) peristaltic flow of a Couple Stress Fluid through a permeable channel is examined in this investigation. The flow analysis is performed in the presence of an External Magnetic Field. Long wavelength and low Reynolds number approach is implemented. Mathematical expressions of axial velocity, pressure gradient and volume flow rate are obtained. Pressure rise, frictional f...

The rate of inflow to a long well can vary along its completion length, e.g. due to frictional pressure losses or reservoir heterogeneity. These variations often negatively affect the oil sweep efficiency and the ultimate oil recovery. Inflow Control Devices (ICDs) represent a mature well completion technology which provides uniformity of the inflow profile by restricting high specific inflow s...

The annular foam breaker is one which uses the vacuum and shear force generated by the Coanda effect to break foam. The pressure distribution directly affects its performance. So an investigation on the flow characteristics inside the annular foam breaker is important to optimize its structure. In this paper, the computational fluid dynamics (CFD) code, FLUENT, is employed to simulate the flow ...