Strengthening of reinforced concrete structures using FRP has emerged as a potential solution to the problems associated with civil infrastructure. Many researchers have reported significant increases in strength and stiffness of concrete structures strengthened with FRP. Nevertheless, possible brittle failures of the strengthened system due to delamination of the FRP strips and/or sheets could...

The concept of an integrated strengthening and damping retrofit system was proposed to design reinforced concrete (RC) columns for their optimal performance under multi-level earthquake hazards. As illustrated in Figure 1, the system consisted of fiber reinforced polymer (FRP) sheets wrapping around a column and viscoelastic (VE) layers on the FRP sheets. The motion of the outer surface of the ...

An innovative concept for normalizing the multiple seismic performance objectives of retrofitted structures was recently introduced by the authors. Referred to as a damping-enhanced strengthening, this integrated damping and strengthening strategy included the bonding component between FRP sheets and viscoelastic layers as well as the anchoring component of FRP sheets into concrete. Although an...

Debonding problems of externally bonded fiber reinforced polymer (FRP) sheets in flexurally FRP-strengthened reinforced concrete (RC) beams have been a concern and a research challenge since their application of this strengthening technique. Intermediate crack induced debonding is the most common failure mode which is that the debonding initiates at the critical flexural-shear or flexural crack...

There is a growing need for the rehabilitation, repair, and upgrading of concrete structures such as bridges and buildings. The repair or rehabilitation of reinforced concrete structures often offers a lower cost alternative to rebuilding, and it is traditionally achieved by bonding steel plates to the tensile face of a reinforced concrete member. The shear strength can be enhanced with plates ...

nowadays frp composite sheets for structural repair, as an efficient and cost-effective technique for restoring and upgrading the load bearing of concrete structures are have become very common. in addition to high strength to weight ratio and the use of frp sheets while structure is in use, these sheets have good fatigue resistance. furthermore, their easy application is also an undeniable adv...

Some of the advantages that results from the structural strengthening of concrete slabs using prestressed fiber reinforced polymer (FRP) systems are as follows: the prestressed FRP delays the formation and propagation of cracks, and both the serviceability and the flexural capacity are increased. In this research program, the flexural performance of a concrete slab strengthened with a three-sta...

In this paper evaluation of seismic capacity of a historical building is carried out. It had been used as a national library about 40 years ago. Also, before that, it had been constructed as a part of a Royal complex. This building has been constructed by traditional methods using bricks and mortars. The ceilings system of the structure consists of jack arches. Also, the roof of the building ha...

Masonry infill walls are often used as non-structural elements. According to the past structural failure, ignorance of interaction between infill walls and enclosed frame may lead to the different seismic response for non-ductile building frames. The main contribution of this paper is to analytically investigate the behavior of reinforced concrete with masonry infill panels as participating str...

This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...