In the aluminium industry, Hot Metal Carriers (HMCs) perform the task of transporting molten aluminium from the smelter (where the aluminium is made) to the casting shed where it is turned into block products. The vehicles weigh approximately 20 tonnes unloaded and resemble forklifts except they have a dedicated hook for manipulating the load, called the crucible. In the perspective of a full a...

A validation study in order to evaluate the efficiency of the inductively coupled plasma optical emission spectrometry (ICP-OES) in the analysis of minor elements (Manganese, Chromium, Copper, Iron and Titanium) in aluminium alloys was carried out. Aluminium casting samples were obtained from addition to aluminium baths of compressed powder compacts of each alloying element and aluminium (minit...

New Zealand Aluminium Smelters Ltd operates a smelting facility at Tiwai Point near Invercargill. The smelter produces aluminium by the electrolytic reduction of alumina in 650 cells. The cells are laid out in long lines and are grouped into tapping bays. The purity of the aluminium varies from cell to cell depending on a number of factors including the age of the cell, the purity of the alumin...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

the aim of this manuscript is to study the implication of aluminium-oxide nanofluid for an amphibious vehicle engine (viable on land and under water) cooling system both analytically and experimentally. to achieve this, a one-dimensional model of the engine cooling system (radiator) is considered through a computational fluid code in which the mass flow rate for a range of the coolant temperatu...

This paper describes a method for removing oxide film from the surface of silicon wafers using an inert gas fusion impulse furnace and precise determination of bulk oxygen within the wafer. A silicon wafer was cut to about 0.35 g (6 x 13 x 2 mm) and dropped into a graphite crucible. The sample was then heated for 40 s at 1300 degrees C. The wafer's oxide film was reduced by carbon and removed a...

In modern steelmaking the duration of a working campaign for a blast furnace is related to the life of the crucible. Adding titanium oxide has been a frequent practice in the operation routines for modern blast furnaces, seeking the protection of the crucible walls, independently from its physical or chemical characteristics. These practices, as conventional operation of iron and steelmaking in...

Hierarchically structured aluminium oxide was hydrothermally synthesized with carbamide as a precipitator. Raman spectroscopy, SEM spectroscopy, and X-ray phase analysis were used to investigate morphology and parameters of porously structured aluminium oxide as influenced upon by concentration of reactive solution, excessive portions of precipitator, and the counterion type. Differing mechanis...

accumulation of aluminium by plants exposed to nano- and microsized particles of al2o3 wasinvestigated in terms of risk assessment and possible application in phytoremediation of contaminated sites.four plant species (allium cepa l., zea mays, lepidium sativum and kalanchoe daigremontiana)were cultivatedon media (soil or liquid medium) contaminated with nano- and microparticles of al2o3. bioava...