نتایج جستجو برای: alumina binder
تعداد نتایج: 19616 فیلتر نتایج به سال:
In this paper, a wax-based binder was developed for low-pressure injection molding of very fine (0,4 μm) average particle size alumina ceramic bodies. The major component used in the binder mixture was paraffin wax. The process of binder removal from the green ceramics presented several difficulties especially when the ceramic powder was very fine, and the pieces had large cross-section. The pr...
ceramic ultrafiltration membranes are considered as an alternative for the treatment of both stable water-in-oil and oil-in-water emulsions proved to be more effective in comparison with other conventional techniques. in this study, symmetric macro-porous ceramic membranes are prepared through dry pressing of α-alumina powder and the addition of various binders including poly (vinyl alcohol). t...
The investment casting of reactive Ti and TiAl alloys requires the use of selected ceramics in the face-coat layer to prevent the reaction between the cast metal and ceramic shell, avoiding the formation of a hard layer at the metallic components surface. This work aims to study the influence of ceramic shells composition in some of its characteristics such as flexural strength, friability and ...
Monolithic ceramics have been fabricated from coated green fibers to create fibrous microstructures. The fibrous monoliths consist of high aspect ratio polycrystalline regions (cells) of a primary phase separated by thin secondphase regions (cell boundaries) designed to improve fracture resistance. The cells are the remnants of the green fiber which consists of ceramic powder and a polymer bind...
The influence of the amount of alumina binders on the catalytic performance of Ni/HZSM-5 for hydrodeoxygenation of cyclohexanone was investigated in a fixed-bed reactor. N2 sorption, X-ray diffraction, H2-chemisorption and temperature-programmed desorption of ammonia were used to characterize the catalysts. It can be observed that the Ni/HZSM-5 catalyst bound with 30 wt.% alumina binder exhibit...
The influence of hydrothermal treatments and alumina binder on the properties catalytic performance in methanol-to-hydrocarbon reaction different zeolite–alumina catalyst extrudates was characterized using a combination ex situ , operando techniques.
The Three Dimensional Printing (3DP) Process hasbe~nadapted for processing of fine ceramic powders to •• prepare structllraLceramic components. Our preliminary study was designed to reveal those aspects ofthe.3DPprocesswhichmust be modified for use with fine ceramic powders. The basic elements of the modified process are to spread submicron alumina powder and printJatex binder. Several methods ...
The main aim of the present study was the preparation and comprehensive characterization of innovative additives to abrasive materials based on functional, pro-ecological lignin-alumina hybrid fillers. The behavior of lignin, alumina and lignin-Al₂O₃ hybrids in a resin matrix was explained on the basis of their surface and application properties determined by inverse gas chromatography, the deg...
Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...
An alumina surface coating is demonstrated to improve electrochemical performance of MoO(3) nanoparticles as high capacity/high-volume expansion anodes for Li-ion batteries. Thin, conformal surface coatings were grown using atomic layer deposition (ALD) that relies on self-limiting surface reactions. ALD coatings were tested on both individual nanoparticles and prefabricated electrodes containi...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید