The Ni-B-P alloy coatings were made autocatalytically (electroless) using an alkaline plating bath with nickel chloride hexahydrate (NiCl2.6H2O) as the source of nickel ions, sodium borohydride (NaBH4) and sodium hypophosphite (NaH2PO2) as reducing agents and source of boron and phosphorous ions, respectively. The effects of bath concentrations on the plating rate, composition of coating, surfa...

Although alloy tin plating has been known and used for many years, this paper will describe the use of a new non-cyanide tin/zinc alloy as a possible replacement coating for cadmium and the use of a tin/nickel alloy as a possible substitute for barrel decorative chromium plating. A review on the corrosion properties of tin, zinc and cadmium compared to tin/zinc alloys and review of the properti...

zinc-nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. in this work the effect of pulse parameters on the zn-ni alloy electrodeposits was investigated. the hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. the surface topography of the deposits was also observed in s...

Lightweight single-layer slotted waveguide array antennas are fabricated using plastic materials with metal-plating. A plastic material that has good heat-radiation properties is investigated. Three types of antennas are fabricated by milling, using ABS resin, heat-radiating plastic, and aluminum alloy. In measurements, all three types of antennas are confirmed to have almost the same VSWR and ...

A need t o find a suitable replacement for cadmium electroplated coatings on mediumto highstrength steels has accelerated the development of economically viable alternatives. This edited version of a presentation at the 30th annual AerospaceIAirline Plating & Metal Finishing Forum examines the development of Australia's Defence Science and Technology Organisation's (DSTO) zinc-nickel electropla...

he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...

Zinc represents the most effective and economic corrosion protection especially for steel base materials. Improved corrosion resistance can be achieved by alloying zinc with small amounts (around 1 Yo) of transition metal elements like Co, Ni and Fe. Zn-Fe and Zn-Co alloys containing up to 1.5 Yo of the transition metal were plated using an alkaline and acidic electrolyte respectively. Zn-Ni al...

IPTME, Loughborough University of Technolom, LEI 1 3TU, UK " 9 7 z777$ __ Abstract P.9 F" Compositionally modulated alloy (CMA) coatings can be synthesised electrochemically The technique is performed by electrodeposition from a plating bath usually containing two different metal ions The alloy modulation is attained through pulsing the voltage or current between two or more pre-optimised level...

In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...