in present research work, homogeneous anion exchange membranes based on polysulfone (qapsfs) were prepared via chloromethylation, amination and alkalization. in amination step, trimethylamine and n,n,n',n'-tetramethyl-1,6-hexanediamine were used as amination and crosslinking agents, respectively. the chloromethylated polysulfone was characterized by 1hnmr spectroscopy and chloromethylation degr...

Recently, increasingly attentions have been paid to the electro-oxidation of ethanol in alkaline media in the context of using ethanol as a fuel in anion-exchange membrane fuel cell. Alkaline media presents several advantages compared to acidic media. It has been found that the electrocatalytic activity for etanol oxidation in alkaline media is much higher than that in acidic media [1]. Further...

in the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (afc) (which the electrolyte has cooling role of system) has been considered. proper control volumes of system with specific qualification have been chosen. consequently, heat and mass transfer in control volumes have been assessed. considerations on them and contributed models lead to approve a double tube heat...

High-Performance Alkaline Direct Methanol Fuel Cell using a Nitrogen-Postdoped Anode Report Title A commercial PtRu/C catalyst postdoped with nitrogen demonstrates a significantly higher performance (?10–20?% improvement) in the anode of an alkaline direct methanol fuel cell than an unmodified commercial PtRu/C catalyst control. The enhanced performance shown herein is attributed at least parti...

A novel, physically strong, quaternary-ammonium-functionalised radiation-grafted ETFE alkaline anion-exchange membrane (AAEM) has been developed for application in fuel cells without undesirable addition of MOH into the anode fuel stream, thereby facilitating stable performances and long term operational lifetimes. A promising H2/O2 fuel cell peak power performance of 130 mW cm -2 was obtained ...

The realm of alkaline-based fuel cells has with the arrival anionic exchange membrane (AEMFCs) taken a great step to replace traditional liquid electrolyte alkaline (AFCs). following review summarises progress, bottleneck issues and highlights most recent research trends within field. activity catalyst materials greatly advanced, however achieving long-term stability remains challenge. Great AE...

A deep analysis of the Fuel Cells technologies state of the art has been done in this article. After a general description of the fuel cell base structure the six most important fuel cell technologies Polymeric Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Phosphoric Acid Fuel Cell (PAFC), Molten Carbonate Fuel Cell (MCFC), Solid Oxide Fu...

The performance of an alkaline fuel cell is investigated using three different fuels, e g., methanol, ethanol and sodium borohydride. Pt/C/Ni was used as anode whereas Mn/C/Ni was used as standard (Electro-Chem-Technic, UK) cathode for all the fuels. Thus, the alkaline fuel cell is used for multi-fuel system. Fresh mixture of electrolyte, potassium hydroxide (5M), and fuel (2M) was fed to and w...

A new high peak power density alkaline fuel cell ~FC! was fabricated using a metal hydriding ~MH! alloy as the anode electrocatalyst and manganese dioxide as the cathode electrocatalyst. The high-loading MH and MnO2 electrocatalysts not only gave a satisfactory steady-state power output, but also deliver additional power stored in the charged MH and MnO2 electrodes when the overall cell voltage...