Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with Al-Si alloy powder to improve corrosion resistance. Characterization by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) analysis revealed that intermetallic compounds (IMCs) of Mg2Si, Al12Mg17 and Al3Mg2 were formed in the matrix of α-Mg and Al solid solutions...

Tensile specimens of nonflammable AZ91D Mg alloy were fabricated in this study via cold chamber die-casting process. Dimensions of tensile specimens were 25mm in length, 4mm in width, and 0.8 or 3.0mm in thickness. Microstructure observation was conducted before and after tensile tests at room temperature. In the die casting process, various injection distances from 150 to 260mm were employed t...

The microstructure and residual stresses of an AA6040 Al to AZ31B Mg friction stir weld are studied using scanning electron microscopy and X-ray diffraction. The complex material flow promoted by the friction stir welding process results in a fine grained structure in the stir zone of both materials due to dynamic/recovery recrystallization. The interface between the materials is characterized ...

In this study, HEA/Al composite interlayer was used to fabricate Ti/Mg bimetal composites by solid-liquid compound casting process. The Al layer prepared on the surface of TC4 alloy hot dipping, and FeCoNiCr HEA magnetron sputtering onto layer. influence thickness pouring temperature interface evolution investigated based SEM observation thermodynamic analysis. Results indicate that sluggish di...

Models for composition and temperature dependencies of single-crystal elastic stiffness coefficients are developed and applied to the Al12Mg17 and hexagonal closed-packed solution phases in the Mg–Al system based on data from first-principles calculations. In combination with models for multi-phases, the bulk, shear, and Young’s moduli of Mg–Al alloys are predicted and compared with available e...

In the present study, friction spot welding or refill friction stir spot welding was performed to consolidate dissimilar AA5754 Al and AZ31 Mg alloys. The intermetallic compounds of Al12Mg17 and Al3Mg2 were primarily found in the weld, distributed at the interface between the base materials and in the Al top sheet. The distribution of the intermetallic compounds and the interfacial area between...

Compound casting is an efficient method for bonding dissimilar metals, in which a dramatic reaction can occur between the melt and solid. The centrifugal process, type of compound casting, was applied to cast Al/Mg bimetals. Magnesium poured at 700°C, with melt-to-solid volume ratios (Vm/Vs) 1.5 3, into preheated hollow aluminum cylinder. preheating temperatures solid part were 320, 400, 450°C,...

The valence states of Mg-Al alloys are compared to those of reference materials (pure Mg and Al metals, and intermetallics). Two methods based on X-ray emission spectroscopy are proposed to determine the phases and their proportion: first, by analyzing the Al valence spectra of the Mg-rich alloys and the Mg valence spectra of the Al-rich alloys; second, by fitting with a linear combination of t...