The effects of different laser shock peening (LSP) impacts on the three-dimensional displayed distributions of surface and in-depth residual stress at a laser spot of AISI 304 stainless steel were investigated by X-ray diffraction technology with the sin2φ method and MATLAB 2010a software. Microstructural evolution in the top surface subjected to multiple LSP impacts was presented by means of c...

Soft X-ray absorption spectroscopy (XAS) has been used to study the influence of Si ion implantation on the passive layer of AISI 304 stainless steel, as well as on its high-temperature oxidation behaviour. Ion implantation is a usual technique to improve the corrosion and oxidation resistance of steels. To study the effects of ion implantation on the room temperature corrosion behavior of AISI...

In this research work, investigations are carried out on Continuous Wave (CW) Nd:YAG laser welding system after preliminary experimentation to understand the influencing parameters associated with laser welding of AISI 304. The experimental procedure involves a series of laser welding trials on AISI 304 stainless steel sheets with various combinations of process parameters like beam power, beam...

Sol-Gel coatings are a good choice for protection and bioactivation of metals used as dentistry and standard surgical implant materials. These films should both prevent degradation of the substrates by wear or corrosion, and bioactivate the material for inducing the formation of a hydroxyapatite (HA) rich layer onto the material surface, thereby permitting a natural bonding to living tissues. T...

In this paper we study the corrosion of AISI 304 austenitic stainless steel PEMFC bipolar plates in aqueous and room-temperature ionic-liquid electrolytes. The anodic potential thresholds and dynamics have been investigated by electrochemical (potentiodynamic and potentiostatic) and in situ spectroelectrochemical methods (visible electroreflectance and VIS-UV spectroellipsometry). We measured t...

The present work is concentrated with the dry turning of AISI 304 Austenitic Stainless Steel (ASS). This paper presents the influence of cutting parameters like cutting speed, feed rate and depth of cut on the surface roughness of austenitic stainless steel during dry turning. A plan of experiments based on Taguchi’s technique has been used to acquire the data. An orthogonal array, the signal t...

A high quality joint between tool steel and stainless steel alloys is hard to achieve with the conventional welding process. In this study, a new process of joining semi-solid AISI D2 tool steel and AISI 304 stainless steel using a partial remelting method is proposed. Metallographic analysis and Vickers hardness tests were performed. The results obtained from investigating the basic geometries...

Corrosive-erosive effect on AISI D3 steel, 304 stainless steel and CrN/AlN coating in aqueous NaCl slurries was studied. CrN/AlN multilayer films with a thickness of 3 m and bilayer period of = 60 nm (50 bilayers) were obtained by using the physical vapor deposition (PVD) technique (magnetron sputtering). The corrosion-erosion experiments were performed in a test machine in which the impingemen...

Release of nickel from nickel or nickel-plated metals, is often responsible for allergic contact dermatitis. However, the effect of nickel-bearing stainless steels is not weil known. ln this paper AISI 304, 316 and 430 type stainless steels, as weil as nickel and nickel-plated materials, are investigated. Three tests were carried out: electrochemical tests and leaching experiments in sodium chl...

Disinfectants play an important role in controlling microbial contamination on hard surfaces in hospitals. The effectiveness of disinfectants in real life can be predicted by laboratory tests that measure killing of microbes on carriers. The modified Quantitative Disk Carrier Test (QCT-2) is a standard laboratory method that employs American Iron and Steel Institute (AISI) Type 430 stainless st...