three dimensioned finite element analysis were conducted on concrete block paving. in order to verify the calculated results, an experimental case study was analyzed. good agreement was observed between the measured and the calculated results. based on the finite element analysis results and available failure models, comprehensive design charts were developed for port and industrial pavement wh...

tooth/implant supported fixed prostheses may present biomechanical design problems, as the implant is rigidly anchored within the alveolus, whereas the tooth is attached by the periodontal ligament to the bone allowing movement. many clinicians prefer tooth/implant supported fixed prosthesis designs with rigid connectors. however, there are some doubts about the effect of attachment placement i...

Three dimensioned finite element analysis were conducted on concrete block paving. In order to verify the calculated results, an experimental case study was analyzed. Good agreement was observed between the measured and the calculated results. Based on the finite element analysis results and available failure models, comprehensive design charts were developed for port and industrial pavement wh...

shaded pole induction motors, despite the simplicity and low cost, are difficult to analyze particularly in the equivalent circuit methods, due to the asymmetric structure, saturation, harmonics, inaccurate estimation of leakage inductances and skew. hence, 3d numerical methods could be very useful in the design and optimization stage. this paper presents the 3d transient finite element analysi...

Shaded pole induction motors, despite the simplicity and low cost, are difficult to analyze particularly in the equivalent circuit methods, due to the asymmetric structure, saturation, harmonics, inaccurate estimation of leakage inductances and skew. Hence, 3D numerical methods could be very useful in the design and optimization stage. This paper presents the 3D transient finite element analysi...

in this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3d finite element modeling and experimental tests. the structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...