The high-velocity oxygen-fuel (HVOF) spraying process was used to fabricate conventional WC-10Co-4Cr coatings and FeCrSiBMn amorphous/nanocrystalline coatings. The synergistic effect of cavitation erosion and corrosion of both coatings was investigated. The results showed that the WC-10Co-4Cr coating had better cavitation erosion-corrosion resistance than the FeCrSiBMn coating in 3.5 wt.% NaCl ...

Thermally sprayed cermet coatings are adequate solutions to improve cavitation and wear resistance of hydraulic turbines made stainless steel (SS), especially in rivers with a high sediment load, such as the Madeira River Brazil. However, some cermets easily dissolved river water, leading premature failure coating costly maintenance. Moreover, galvanic corrosion induced by coupling SS can accel...

300M, an ultra-high strength steel used in aeronautics for landing gears, is generally shot-peened and coated with High Velocity Oxygen Fuel sprayed WC-10Co-4Cr to improve tribological behavior. In literature, few treatment parameters have been tested analyze the surface integrity influence on fatigue properties. The self-heating method under cyclic loading quickly determine properties by coupl...

In this study, the effect of surface roughness and roughness morphology on the bond strength of WC-Co-Cr coatings has investigated. The three different surfaces morphology are use for this purpose. The first and tow samples sandblasted with alumina and silicon carbide respectively. Other sample no sandblasted before spraying process. The same WC-10Co-4Cr coating deposited on the substrates with...

The aim of this paper is to investigate the WC-10Co-4Cr coatings reinforced with 5 % and 10 yttria-stabilized zirconia (Y2O3/ZrO2; YSZ) nanoparticles deposited on CA6NM turbine steel by using high-velocity oxy-fuel (HVOF) thermal spraying technique. In HVOF technique, hot jet semi-solid particles strikes against workpiece creates a layer coating varying thickness substrate material. fabricated ...