I. Samardžić, Faculty of Mechanical Engineering Slavonski Brod, Croatia, A. Ćorić, Bratstvo, Novi Travnik, Bosnia and Herzegovina, M. Dunđer, Department for Polytechnic, University of Rijeka, Croatia. This paper presents the results of weldability investigation on welded joints made of fine grained high-strength S1100QL steel. The investigations are performed on two welded plates by HV 10 hardn...

This work demonstrates applicability of electron beam welding (EBW) and laser (LBW) techniques for manufacture tailored welded blanks (TWBs) from Al-5251 (H22) Al-6082 (T6) sheets. A combination dissimilar sheets as well thicknesses (1.5 mm 2.5 mm) has been used in addition to a similar combination. An optimal post-weld heat treatment (PWHT) was determined that effective relieving stresses impa...

the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...

We have proposed that visual narratives in comics are organized with a hierarchic narrative “grammar.” Inspired by classic “click” studies of syntax, we inserted blank “disruption” panels Before, At, or After the constituent boundaries of comic strips. In self-paced viewing, Experiment 1 found that blanks After the boundary were viewed slower than Before or At the boundary. Panels immediately f...

The prediction of fatigue life of metal welded joints plays an important role at lower manufacturing costs and reduces accidents for engineering materials, the response of metal welded joints to fatigue properties has highly non-linear, so it is difficult to establish an accurate theoretical model using traditional method to predict its fatigue life. It is appropriate to consider modeling metho...

The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also pre...

Very often, in order to optimized welded constructions, some of their parts are made of heterogeneous steels. For example, microalloyed steels are in use for cars chassis making and high alloyed steels for different constructions making. From that reason, it’s not rare to find welded joints between ferrite microalloyed and austenitic highalloyed steels. As a rule, these joints are welded by usi...

Monitoring systems for the laser keyhole welding process of aluminium Tailor Welded Blanks, are in many cases vital to ensure a certain weld quality. Especially process visualization with camera based systems gives a lot of insight. Although for steel it has already been demonstrated that images can be obtained in real-time from the laser welding process using these cameras based on silicon chi...

On a two-dimensional cake, there are m pairwise-disjoint toppings. It is required to cut the cake to m + b pieces, such that each topping is entirely contained in a unique piece, and the total number of empty pieces (b, ”blanks”) is minimized. The minimal number of blanks naturally depends on the geometric constraints of the cake and its pieces. I present tight bounds on the number of blanks wh...