Using confocal microscopy, we have studied the morphology of polymer dispersed liquid crystals ~PDLC! as a function of polymer/liquid crystal composition, polymer cure temperature, and ultraviolet ~UV! curing power and determined how this morphology affects the electro-optical properties. The PDLC morphology consists of a spongelike texture where spherically shaped liquid crystalline domains ar...

New nanocomposites composed of cellulose nanofibers or "whiskers" and an epoxy resin were prepared. Cellulose whiskers with aspect ratios of approximately 10 and approximately 84 were isolated from cotton and sea animals called tunicates, respectively. Suspensions of these whiskers in dimethylformamide were combined with an oligomeric difunctional diglycidyl ether of bisphenol A with an epoxide...

Composites of lead zirconate titanate particles in an epoxy matrix are prepared in the form of 0-3 and quasi 1-3 with different ceramic volume contents from 10% to 50%. Two different processing routes are tested. Firstly a conventional dielectrophoretic structuring is used to induce a chain-like particle configuration, followed by curing the matrix and poling at a high temperature and under a h...

methanesulfonic acid (msa) was found to be an efficient catalyst for the synthesis of 1-substituted-1h-1,2,3,4-tetrazoles. a series of 1-substituted tetrazole compounds were synthesized from the reaction of various primary amines, sodium azide and triethyl orthoformate in the presence of catalytic amounts of msa at room temperature. in this protocol, some of the tetrazole derivatives were synth...

Various methods of toughening the bonding between the interleaf and laminate glass fiber reinforced polymer (GFRP) have been developed due to the increasing applications in industries. A polystyrene (PS) additive modified epoxy is used to improve the diffusion and precipitation region between polysulfone (PSU) interleaf and epoxy due to its influence on the curing kinetics without changing glas...

Abstract Structural electrolytes provide mechanical properties approaching structural resin combined with a high degree of ionic conductivity. Here, based on bisphenol A diglycidyl ether and the liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (EMIM-TFSI) were synthesised through reaction induced phase separation (RIPS) using isophorone diamine (iPDA) as curing agent. The m...

Refractive index control of benzocyclobutene (BCB 4024-40) is achieved by facilitating different conditions during the thermal curing of BCB film. Refractive index (RI) change of 1.49% is obtained with curing of BCB film using an oven, while the RI change is 0.1% when the BCB is cured using a hotplate. The two different curing methods exhibit a temperature dependent refractive index change of t...

Quasi-elastic neutron scattering was used to monitor the temperature-dependant hydration of tricalcium silicate and Portland cement. Results show that for some samples the degree of hydration is in fact higher at lower curing temperatures. To investigate this effect further, we performed a series of experiments in which samples are initially hydrated at one temperature and then the diffusion pr...

This study investigated temperature rises caused by different light curing units (LCUs) in dentin of different thicknesses. The different LCUs tested in this study were namely: quartz-tungsten-halogen (QTH) (Heliolux DLX) LCU, plasma arc (PAC) (Apollo 95E Elite) LCU, and light emitting diode (LED) (Mini LED) in standard curing mode as well as pulse and soft-start modes. One hundred and forty de...