The stability of austenite against strain induced martensitic transformation (SIMT) strongly depends on the grain size of the austenite. This is observed in austenitic steels with grain sizes from several pm up to several hundred pm and for much smaller austenitic grains (three orders of magnitude) that are embedded in a non austenitic matrix. fcc Fe-precipitates may be formed in dilute Cu-Fe a...

Introduction. The aim of this work is to summarize the up to now progress in a development of a FE knee model after a total replacement operation. There are also introduced ways of future development which leads to a dynamic model containing aside all three articulating bones and its replacements also simplified models of main muscles and ligaments. Whole this work is computed using a code Abaq...

Both the Super-Elastic and Shape Memory Effect has been taken into account in this study by using SMA with high activation temperature. A Thermo-Mechanical SMA phenomenological constitutive model is used to simulate the SMA behaviour. The dynamic response data of a frame structure has been obtained from FE analysis by using the nonlinear FE software program MSC Marc. Then the frame is braced an...

Unraveling the atomic structures of ultrafine iron clusters is critical to understanding their size-dependent catalytic effects and electronic properties. Here, we describe the stable close-packed structure of ultrafine Fe clusters for the first time, thanks to the superior properties of graphene, including the monolayer thickness, chemical inertness, mechanical strength, electrical and thermal...

In the last decade, many finite element (FE) models of the spine were used as surrogate experiments to provide relevant knowledge on the biomechanics of spinal trauma [1-2]. One of the major concerns in the development of such model is the modeling and validation of the spinal components’ mechanical behavior in dynamic loading conditions. For instance, very few FE models have considered the str...

PURPOSE (1) To use finite element (FE) modelling to estimate local iris stresses (i.e. internal forces) as a result of mechanical pupil expansion; and to (2) compare such stresses as generated from several commercially available expanders (Iris hooks, APX dilator and Malyugin ring) to determine which design and deployment method are most likely to cause iris damage. METHODS We used a biofidel...

It is critical to clarify orthodontic load transfer mechanism from tooth to alveolar bone, and to determine the influence of applied orthodontic force on tooth behaviour. In this study, two dimensional (2-D) finite element (FE) models were constructed to simulate to mechanical behaviour observed during the initial movement of periodontal ligament (PDL) deformation, and to evaluate the effects o...

Shear wave elasticity imaging (SWEI) can assess the elasticity of tissues, but the shear modulus estimated in SWEI is often less sensitive to a subtle change of the stiffness that produces only small mechanical contrast to the background tissues. Because most soft tissues exhibit mechanical nonlinearity that differs in tissue types, mechanical contrast can be enhanced if the tissues are compres...

A volume expansion of up to ~310% occurs upon the lithiation of silicon in Si-coated nickel inverse opal anodes, which causes (de)lithiation-induced mismatch stresses and strains between the Si and Ni during battery cyclical (dis)charging. These (de)lithiation-induced mismatch strains and stresses are modeled via sequentially coupled diffusionand stress-based finite element (FE) analysis, which...

In this work, we present an automatized, computationally efficient and stable compact modeling technique for a large-scale multiport model of MEMS based piezoelectric energy harvester. The method includes structure preserving model order reduction based on Krylov subspaces. We further demonstrate a cosimulation between the reduced harvester model and the power circuitry. Introduction MEMS (micr...