The heat capacities of argon, ammonia, and methanol on carbon black at 87.3, 240, and 300 K, respectively, have been investigated. The carbon black surface has been modeled with and without carbonyl groups. Part of this investigation is a decomposition of the heat capacity into its contributions from the different interaction potentials of an adsorption system. All systems show a spectrum of he...

Chromium is one of the most common heavy metals which exist in very high concentrations in wastewater. The removal is very expensive due to the high cost of normal adsorbents. Lignocellulosic materials and mainly treated materials have proven to be a good solution for this problem. Adsorption tests were performed at different pH, different times and with varying concentrations. Results show tha...

Irreversible adsorption of a virulent phage, phage A25, to heat-killed streptococci, groups A, G, and A variant, has been achieved. Adsorption reflected the observed host range for phage A25 in that heat-killed group B cells were not able to inactivate the phage. Broken cells, cell walls, and peptidoglycan prepared from a group A strain K56 failed to adsorb the phage irreversibly, but retained ...

The heat of adsorption and sticking probability of CO on well-defined Pd nanoparticles were measured as a function of particle size using single crystal adsorption microcalorimetry. Pd particles of different average sizes ranging from 120 to 4900 atoms per particle (or from 1.8 to 8 nm) and Pd(111) were used that were supported on a model in situ grown Fe(3)O(4)/Pt(111) oxide film. To precisely...

Adsorption behavior of unburned carbons from fly ash has been investigated in this study. Batch tests and column test were carried out for several unburned carbon samples from various ash sources and processing schemes. Adsorption isotherms have been obtained from these tests. Results show that the unburned carbons have equal or better adsorption capacity for elemental mercury comparing with so...

A numerical investigation of the double-effect adsorption refrigeration cycle is examined in this manuscript. The proposed cycle is based on the cascading adsorption cycle, where condensation heat that is produced in the top cycle is utilized as the driving heat source for the bottom cycle. The results show that the double-effect cycle produces a higher coefficient of performance (COP) as compa...

In this study 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) interaction with carbon nanocone(NC) and nanocone Sheet (NCS) was evaluated by density functional theory. The calculated thermodynamic parameters including Gibbs free energy changes and Enthalpy alterations showed the interaction of TATB with the both nanostructures are exothermic, spontaneous, experimentally possible ...

In this study, adsorption measurement of various chlorinated hydrocarbons on Y-type zeolites were performed using the chromatographic method to examine the adsorption phenomena. Dichloromethane (DCM), chloroform (TCM), trichloroethylene (TCE), and tetrachloroethylene (PCE), were used as the chlorinated hydrocarbons, and PQ-USY, USY-6.18, Na-Y, HSZ-390HUD, Pentasile-2 and Pentacil-1 were used as...

Solid waste (SW) from a biodiesel plant has been successfully used for the removal of the hazardous cationic water soluble dye methylene blue (MB) from an aqueous phase. Batch adsorption studies were carried out by monitoring the pH, amount of adsorbent, initial dye concentration and contact time. Attempts have also been made to monitor the adsorption process through Langmuir, Freundlich, Temki...