The magnetic properties of nano-crystalline CoMxFe2 xO4 (where M=Gd and Pr and x 1⁄4 0; 0.1 and 0.2) powders prepared by a citrate precursor technique have been studied by using vibrating sample magnetometer (VSM). The crystallite sizes of the materials were varied by altering the synthetic conditions and are within the range of a minimum of 6.8 nm and a maximum of 87.5 nm. The materials were c...

The cementing manufacturing process of ferrite phase shifters has the defect that cementing strength is insufficient and fractures always appear. A detection method of these defects was studied utilizing the multi-sensors Prognostic and Health Management (PHM) theory. Aiming at these process defects, the reasons that lead to defects are analyzed in this paper. In the meanwhile, the key process ...

The effects of stoichiometry factor on the magnetic and structural properties of perpendicular barium ferrite thin films with composition of BaO (Fe2O3) were systematically investigated. Within the range 2 2 6, the -axis for barium ferrite thin films can be oriented perpendicularly by the use of Pt underlayer and with optimized processing conditions. Perpendicular -axis orientation becomes wors...

Barium ferrite thin films with perpendicular magnetic anisotropy have been prepared on heated (001) sapphire substrates by laser ablation deposition in an oxygen atmosphere using a KrF excimer laser. X-ray diffraction patterns reveal highly oriented films of the magnetoplumbite phase with a c-axis angular spread of 1.8”. Scanning electron micrographs reveal that these films are polycrystalline ...

A cation-excess (Ni,Mn) ferrite N~o.~zMno.51Fe2.0504.0 with a single phase was synthesized by heating the mixture of corresponding metal salts and oxide in 5% 02175% C02120% N2 gas mixture for 18h at 1100C. It could be thermochemically activated to form a cation-excess ferrite Nio,5z~l+s~Mno.51~l+6~Fe2~05~1+6~0440 in N2 gas at elevated temperature: The ( value was 0.03 1 at 1100C. The activated...

In this work, the investigation of wave absorption, phase formation, crystal structure and magnetic properties of SrFe12O19 hexa-ferrites nanoparticles that synthesized by co-precipitation using a microwave heating system and polyaniline-SrFe12O19 was carried out by using a combination of vector network analyser (VNA), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier tra...

T(1)(ρ) imaging is useful in a number of clinical applications. T(1)(ρ) preparation methods, however, are sensitive to non-uniformities of the B0 magnetic field and the B1 RF field. These common system imperfections can result in image artifacts and quantification errors in T(1)(ρ) imaging. We report on a phase-cycling method which can eliminate B1 RF inhomogeneity effects in T(1)(ρ) imaging. T...

introduction echo-planar imaging (epi) is a group of fast data acquisition methods commonly used in fmri studies. it acquires multiple image lines in k-space after a single excitation, which leads to a very short scan time. a well-known problem with epi is that it is more sensitive to distortions due to the used encoding scheme. source of distortion is inhomogeneity in the static b0 field that ...

Investigations were carried out to study the effects of heat treatment on the mechanical properties of rolled medium carbon steel. The steel was heated to the austenizing temperature of 830C and water quenched; It was reheated to the ferrite – austenite two phase region at a temperature of 745C below the effective Ac3 point. The steel was then rapidly quenched in water and tempered at 480C to p...

Low-temperature bainite, obtained by the transformation of austenite at temperatures as low as 200oC for times as large as several days, has been reported to have extraordinary mechanical properties including the highest reported hardness of any bainitic steel. The unusual properties are a consequence of the fine scale of the microstructure, which contains bainite plates with thickness in the r...