Integrating the entire system on a chip (SOC) is one of themain challenges formany researchers all over the world. One of the major breakthroughs toward achieving this goal has been the ability to manufacture multiple gate oxides for different requirements on the same chip. The most attractive of the techniques currently in the literature is the implantation of nitrogen in silicon, which can be...

Attenuation in a gas results from a combination of classical attenuation, attenuation from diffusion, and attenuation due to molecular relaxation. In previous papers [J. Acoust. Soc. Am. 109, 1955 (2001); 110, 2974 (2001)] a model is described that predicts the attenuation from vibrational relaxation in gas mixtures. In order to validate this model, the attenuation was measured using a pulse te...

This paper discusses nitrogen removal mechanisms in an aerobic membrane bioreactor (MBR) treating high strength pet food wastewater characterized by oil & grease, COD, BOD5, TSS, TKN, NH4-N concentrations of 2800 mg/L, 25000 mg/L, 10000 mg/L, 4500 mg/L, 1650 mg/L and 1300 mg/L respectively. An MBR operating at SRT >25 days achieved mixed liquor total suspended solids (MLTSS) concentrations >300...

/.'•STRACT: The existing information about he theological , .... ,•t•pe•ties of solid methane and nitrogen is reviewed. The ,.-ma• l•mtion is the absence of creep data for solid nitrogen, •:• es :t•ated properties are derived on the basis of simple ß •aling arguments for van der Waals bonded materials. On Trim solid methane and most likely nitrogen are too soft to m.:Bx• any topography over bil...

Nitrogen determinations, performed upon the mycelia of Trichophyton rubrum, indicated that both the total nitrogen to mycelial weight ratio and the protein nitrogen to mycelial weight ratio decreased as the age of the mycelia increased. An increase in nitrogen concentration in the medium produced an increase in the total nitrogen to mycelia weight ratio, but did not necessarily increase the pro...

AISI 316 stainless steels were coated with 250 nm Ni film by electron beam deposition and post-annealed at different temperatures with a nitrogen flow of 600 cm3min-1 nitrogen. The prepared samples were corrosion tested in 1.0 M sulphuric acid solution using potentiodynamic technique. Crystallographic and morphological structure of the samples were analyzedanalysed by X-ray diffraction (XRD) an...