With the increases in costs of iron and copper ores, incongruity between significant imports these ores into China ongoing accumulation unused slag has greatly increased. Even so, there are few low-value methods for utilization slag. The present work demonstrates processing this material via reduction whilst smelting wear-resistant cast iron. This system is able to recover copper, iron, zinc, l...

The present paper investigated the process of the slag wool fabrication using high temperature blast furnace (BF) slag modified by coal ash (CA). The liquidus temperature and viscosity of the slag system with different mass ratios of BF slag and CA were measured through an inner cylinder rotation method. The approximate mass ratio used to fabricate the slag wool was therefore determined and sla...

Ground granulated blast furnace slag is widely used as a mineral admixture to replace partial Portland cement in the concrete industry. As the amount of slag increases, the late-age compressive strength of concrete mixtures increases. However, after an optimum point, any further increase in slag does not improve the late-age compressive strength. This optimum replacement ratio of slag is a cruc...

Nigeria is blessed with abundant iron ore deposits of nearly 3 billion tonnes and other basic minerals for steel production including coal and limestone. Yet the Nigerian steel sector has collapsed principally due to shortage of raw materials particularly iron ore for the integrated steel plants and billets for the rolling mills. The privatization of the steel sector that was done in 2004-2005 ...

Ohio has substantial lands impacted by surface mining for coal and an active steel industry. Steel industry slags have been used as liming compounds for agriculture and acid mine soil reclamation. This 3-year study evaluates slags from Ohio steel mills in greenhouse trials where these materials are compared to reagent grade CaCO 3 in their ability to improve plant growth on acid mine soil. The ...

The solid particle contamination is a challenge for the cement industries due to the highly dusty environment. The contaminants cause severe wear between moving surfaces and this in turn leads to rapid mechanical failure of the machine elements. The solid particle contaminants get into the lubricant among the metal surfaces due to the environmental conditions. The conditions get more severe in ...

A new twin-roll continuous slag solidification process and heat recovery process from a slag packed bed was developed for utilization of the waste heat of steelmaking slag. Plate-shaped slag with the thickness about 7 mm was successfully produced in a pilot plant, and the sensible heat of the slag was recovered by blowing air into the slag chamber. However, the gas distribution inside the slag ...