The beam scanning properties of a 2-element patch array fed by a microstrip feed situated on a ferrite substrate are presented. Biasing the femte changes the phase length of the microstrip line, scanning the beam by up to 40. The resulting scan loss is -2dB, mainly due to the ferrite becoming lossy as it approaches absorption resonance. Introduction: Ferrite substrates have been the subject of...

Nanostructured zinc-copper mixed ferrite was synthesized using sol-gel method. XRD patterns of different compositions of zinc-copper ferrite, Zn(1-x)Cu(x)Fe2O4 (x = 0.0, 0.25, 0.50, 0.75), revealed single phase inverse spinel ferrite in all the samples synthesized. With increasing copper concentration, the crystallite size was found to be increased from 28 nm to 47 nm. The surface morphology of...

Strontium ferrite nanoparticles were prepared by a coprecipitation method, and reduced graphene oxide/strontium ferrite/polyaniline (R-GO/SF/PANI) ternary nanocomposites were prepared by in situ polymerization method. The morphology, structure, and magnetic properties of the ternary nanocomposites were investigated by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-I...

Strength and toughness are a couple of paradox as similar as strength-ductility trade-off in homogenous materials, body-centered-cubic steels in particular. Here we report a simple way to get ultrahigh toughness without sacrificing strength. By simple alloying design and hot rolling the 5Mn3Al steels in ferrite/austenite dual phase temperature region, we obtain a series of ferrite/martensite la...

Articles you may be interested in Dielectric relaxations and alternating current conductivity in manganese substituted cobalt ferrite Impedance spectroscopy study of strontium modified lead zirconate titanate ceramics Dielectric and magnetic properties of sol-gel-derived lead iron niobate ceramics Gadolinium (Gd) substituted cobalt ferrites (CoFe 2Àx Gd x O 4 , referred to CFGO) with variable G...

the present paper studies the possibility of propagation of torsional surface waves in an inhomogeneous anisotropic layer lying between two heterogeneous half-spaces (upper and lower half-space). both the half-spaces are assumed to be under compressive initial stress. the study reveals that under the assumed conditions, a torsional surface wave propagates in the medium. the dispersion relation ...

INTRODUCTION Stainless steel welds characteristically consist of a two-phase austenite plus ferrite microstructure. Ferrite levels may vary from a few percent in austenitic stainless steel welds to more than 50% in duplex stainless steel welds. The ability to predict the ferrite content in these welds is essential for many reasons. To a large extent, the final ferrite content determines a weldm...

Composite material based on Fe3Si micro-particles and Mn-Zn nano-ferrite was prepared using powder metallurgy technology. The sol-gel followed by autocombustion process was used for synthesis of Mn0.8Zn0.2Fe2O4 ferrite. 3 wt.% of mechanically milled ferrite was mixed with Fe3Si powder alloy. Mixed micro-nano powder system was homogenized by the Resonant Acoustic Mixing using ResodynLabRAM Mixer...

Magnetic powder of Sr-ferrite was prepared by conventional and sol-gel auto-combustion methods. In conventional method, strontium carbonate and ferric oxide powders were mixed together and then mixture was calcined. In sol-gel auto-combustion method, a solution containing strontium nitrate, ferric nitrate and citric acid was heated until the combustion took place automatically; then, as-burnt p...