نتایج جستجو برای: welding electrode
تعداد نتایج: 79258 فیلتر نتایج به سال:
چکیده ندارد.
In Arc welding heat is transferred to the joint by an electrode. During manual metal Arc Welding this heat is transferred by melting the electrode. The stresses generated in welded plate are due to temperature raise and can be simple and thermal stresses. The stresses generated will cause distortion and changing the shape of the welded plates. The study of the distortion and residual stresses i...
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
در اثر شدت تمرکز حرارت در نواحی نزدیک خط جوش، سیکل های حرارتی شدیدی در این نواحی ایجاد می شود که منجر به تغییر فرم پلاستیک غیرهموژن و ایجاد تنش های پسماند در قطعه جوش خورده می گردد. تنش های پسماند معمولاً زیان آورند و حساسیت جوش را به خستگی، ترک خوردگی ناشی از خوردگی و تنش(scc) و شکست افزایش می دهند. مونل400 که یک آلیاژ پایه نیکل می باشد از مواردی است که وقتی در معرض اسید هیدروفلوریک یا اسیدکلری...
In this research in order to improve the mechanical properties of Aluminium alloy 2024, nanostructure Aluminum sheets were first produced by Cryorolling process and then was welded by resistance spot welding method. For this purpose, the samples solution treated at 495˚C for 55 minute and subsequently cryorolled up to 85% reduction in thickness. For obtaining simultaneous strength and ductility...
In this research in order to improve the mechanical properties of Aluminium alloy 2024, nanostructure Aluminum sheets were first produced by Cryorolling process and then was welded by resistance spot welding method. For this purpose, the samples solution treated at 495˚C for 55 minute and subsequently cryorolled up to 85% reduction in thickness. For obtaining simultaneous strength and ductility...
Inert-gas Arc Welding of Aluminium Aluminium is used widely in metal fabrication processes, chiefly on account of its lightness, the ease with which it may be cast, and its extreme ductility. It is also highly resistant to corrosion, owing to the formation of a protective film of oxide on the surface of the metal. This latter property, however, becomes a disadvantage when it is desired to weld ...
METAL transfer describes the process of the molten metal movement from the electrode tip to the workpiece in gas metal arc welding (GMAW). A better understanding of the metal transfer process is important for improvements in the quality and productivity of welding. While several distinct modes of the metal transfer have been classified,[1] the globular and spray transfer modes have received att...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید