This communication presents the main results about the design and in-house fabrication of a new solid-state neutron detector, which produces a DC output signal proportional to the thermal neutron fluence rate. The detector has been developed within the framework of the 3-y project NESCOFI@BTF of INFN (CSN V). Due to its sensitivity, photon rejection, low cost and minimum size, this device is su...

Resonant and off-resonant mid-infrared pump–probe spectroscopy is used to measure the vibrational dynamics of CO adsorbed thin (0.2 nm, 2 10 nm) heterogeneous Pt layers in an aqueous solution. The transient signals observed with resonant pumping are dominated by relaxation internal stretch vibration a lifetime T1 ∼ 3 ps all cases. Off-resonant suppresses that contribution signal singles out sig...

A non-physical wedge generates a spatial dose distribution similar to that produced by a physical wedge without a physical filter in the photon beam. Instead, an exponential fluence profile is produced via motion of one of the collimating jaws. Proposed in the late 1970s, nonphysical wedges have been implemented on both Varian and Siemens’ accelerators as the Varian Dynamic Wedge (DW) and Sieme...

Laser-induced-plasma-assisted ablation (LIPAA) is a promising micro-machining method that can fabricate microstructure on hard and transparent double-polished single crystal sapphire (SCS). While ablating, a nanosecond pulse 1064 nm wavelength laser beam travels through the SCS substrate and bombards the copper target lined up behind the substrate, which excites the ablating plasma. When laser ...

Uranium microparticles (radii: 50 nm-1.25 μm) were modelled surrounded by tissue and exposed to natural background radiation, in order to investigate potential dose enhancements from photon interactions. Generally, the results depended on the microparticle size. For a 0.5 μm radius microparticle in an isotropic field, it was found that the combined photon/electron doses deposited in 1 and 10 μm...

We experimentally investigate the limits of 800-nm-to-terahertz (THz) energy conversion in lithium niobate at room temperature driven by amplified Ti:sapphire laser pulses with tilted pulse front. The influence of the pump central wavelength, pulse duration, and fluence on THz generation is studied. We achieved a high peak efficiency of 0.12% using transform limited 150 fs pulses and observed s...

The Swift X-ray Telescope (XRT) has discovered that flares are quite common in early X-ray afterglows of gamma-ray bursts (GRBs), being observed in roughly 50% of afterglows with prompt follow-up observations. The flares range in fluence from a few per cent to approximately 100% of the fluence of the prompt emission (the GRB). Repetitive flares are seen, with more than four successive flares de...

Background: Monte Carlo (MC) modeling of a linear accelerator is a prerequisite for Monte Carlo dose calculations in external beam radiotherapy. In this study, a simple and efficient model was developed for Elekta SL-25 linear accelerator using MCNP4C Monte Carlo code Materials and methods: The head of Elekta SL-25 linac was simulated for 6 and 18 MV photon beams using MCNP4C MC code. Energ...

The study of highly photo-excited matter at solid state density is an emerging field of research, which is benefitting the development of free-electron-laser (FEL) technology. We report an extreme ultraviolet (XUV) reflectivity experiment from a titanium (Ti) sample irradiated with ultrafast seeded FEL pulses at variable incident photon fluence and frequency. Using a Drude formalism we relate t...