The mechanical strength of an Al-30% Si alloy in the mushy zone was estimated by using a novel centrifugation apparatus. In the apparatus, the alloy melt was partially solidified, forming a porous structure made of primary Si platelets (Si foam) while cooling. Subsequently, pressure generated by centrifugal force pushed the liquid phase out of the foam. The estimated mechanical strength of the ...

Channel segregation, which is featured by the strip-like shape with compositional variation in cast materials due to density contrast-induced flow during solidification, frequently causes the severe destruction of homogeneity and some fatal damage. An investigation of its mechanism sheds light on the understanding and control of the channel segregation formation in solidifying metals, such as s...

The deformation of a directionally solidified columnar dendritic mushy zone in a transparent succinonitrile-acetone (SCN-ACE) alloy has been studied experimentally. In addition to solidifying dendritically like a metal alloy, this alloy also has mechanical properties that are similar to those of metals near the melting point. The experiments are relevant, for example, to the deformation of a pa...

Mathematical models and associated numerical techniques have been developed to investigate the complicated transport phenomena in spot hybrid laser-MIG keyhole welding. A continuum formulation is used to handle solid phase, liquid phase, and the mushy zone during the melting and solidification processes. The volume of fluid (VOF) method is employed to handle free surfaces, and the enthalpy meth...

Hot tearing: from organic alloys to superalloys. The appearance of solidification cracks or hot tears during casting is a serious defect. EPF-Lausanne has developed a criterion for the appearance of hot tears which is based upon a mass balance performed over the liquid and solid phases and which takes into accounts for the tensile deformation of the solid skeleton perpendicular to the growing d...

An oscillatory microstructure has been observed during deep-cellular growth of directionally solidified Sn-36at.%Ni hyperperitectic alloy containing intermetallic compounds with narrow solubility range. This oscillatory microstructure with a dimension of tens of micrometers has been observed for the first time. The morphology of this wave-like oscillatory structure is similar to secondary dendr...

A hot tear indicator based on the physics of solidification and deformation is presented. This indicator is derived using available data from computer simulation of solidification and solid deformation. Hot tears form when the mushy zone is starved of liquid feeding and deformed in tension. The unfed tensile deformation causes a small additional porosity. A physical model based on a mass balanc...

The relationship between emissivity, delay time, and surface growth for metastable solidification of CoSi-62 at. % eutectic alloys is reported from undercooling experiments conducted using electrostatic levitation. A fraction of the undercooled melt is first solidified to CoSi2 with subsequent nucleation in the mushy-zone of CoSi after an observed delay time. During this double recalescence eve...

The thermo-physical and physical properties of the liquid and solid phases are critical components in casting simulations. Such properties include the fraction solid transformed, enthalpy release, thermal conductivity, volume and density, all as a function of temperature. Due to the difficulty in experimentally determining such properties at solidification temperatures, little information exist...