This study describes the correlation between the microstructure, mechanical and tribological properties of Ti1-xCx coatings (with x being in the range of 0-1), deposited by reactive magnetron sputtering from a Ti target in Ar/C2H2 mixtures at ~200 °C. The mechanical and tribological properties were found to strongly depend on the chemical composition and the microstructure present. Very dense s...

In this investigation PVD Ti-Cr)N coatings were deposited on hardened and tempered tool steel substrates using reactive arc evaporation. Physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and modulus young and coefficient friction were evaluated. Phase compositions were studies by X-ray diffraction method. The surface microstructure and morp...

Despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. In this research electroless Ni-B-Tl coating was used with the aim to increase their surface hardness. The effects of Nickel chloride, Sodium borohydride, Thallium nitrate and Ethylendiamin on the chemical composition of coating were studied. To achieve an increase in hardness, the effects of ...

Nanohydroxyapatite-carbon nanotube composite coatings were deposited via electrophoretic deposition (EPD). AISI 316L stainless steel and ethanol were used as substrate and dispersing medium, respectively. 5%wt carbon nanotube (CNT) was used as reinforcing phase. Uniform and macrocrack-free coatings were obtained both for hydroxyapatite (HA) and HA-5%wt CNT coatings. Scanning electron micros...

Nanohydroxyapatite-carbon nanotube Nanocomposite (HA-CNT) coatings were deposited via electrophoretic deposition (EPD). Hydroxyapatite was synthesized via microwave combustion method using calcium nitrate and glycing as starting materials. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that pure hydroxyapatite nanoparticles have been synthesized. AISI 316L s...

Single crystalline tin oxide (SnO2) nanowires have been synthesized by carbothermal reduction of SnO2 nanopowder followed by thermal evaporation of the reduced precursor and growth via the vapor-liquid-solid (VLS) growth mechanism. The nanowires are deposited on single crystalline TiO2 substrates of orientations of (100) and (110) that are coated with a thin film and colloids of gold (Au) catal...

Thin oxinitride films of Zn-Sn-O-N and Si-Al-O-N were deposited on glass by reactive magnetron sputtering at various nitrogen-to-oxygen ratios. Nitrogen added to oxygen led to decrease of the surface roughness and increase of oleophobic properties studied by the oil-drop test. The best oleophobity was obtained for Zn-Sn-O-N oxinitride at Zn:Sn=1:1 and N:O=1:2. Improved oleophobic properties wer...

access at Springerlink.com ABSTRACT B4C coatings for B-based neutron detector applications were deposited using high-power impulse magnetron sputtering (HiPIMS) and direct current magnetron sputtering (DCMS) processes. The coatings were deposited on Si(001) as well as on flat and macrostructured (grooved) Al blades in an industrial coating unit using B4C compound targets in Ar. The HiPIMS and D...

nanosized tio2 particles were prepared by sol–gel method. the tio2 particles were co-deposited with chromium using electrodeposition technique. in investigating of coating surfaces by scanning electron microscope (sem), the results showed that the morphology of the coating surface was changed by adding tio2 nanoparticles to the chromium coating. the corrosion behavior of the coatings was assess...

The impact of magnetic nanoparticles with different surface coating upon the isotropic-to-nematic and nematic-to-smectic- A phase transitions of the liquid crystal octylcyanobiphenyl is explored by means of high-resolution adiabatic scanning calorimetry. A shrinkage of the nematic range is observed, which is strongly dependent on the surface coating of the nanoparticles. The isotropic-to-nemati...