Cross-flow ultrafiltration of macromolecular solutions in a module with microchannels is expected to have the advantages of fast diffusion from the membrane surface and a high ratio of membrane surface area to feed liquid volume. Cross-flow ultrafiltration modules with microchannels are expected to be used for separation and refining and as membrane reactors in microchemical processes. Though t...

Operating parameters and membrane characteristics strongly affect the performance of electrodialysis reversal systems. The most impactful factors are applied voltage, flow rate, temperature, initial feed composition, and ion exchange membrane characteristics; the pH of the feed also has an effect, although to a lesser extent. To determine more precisely how all of these factors impact performan...

To recover gold, this work used a novel direct contact membrane distillation (DCMD) reactor with a hybrid electrolytic process. Analytical results demonstrate that permeate flux increased as feed -2 -1 temperature and feed flow rate increased. Permeate flux increased from 2.8 to 17.6 kg m h when -2 -1 temperature increased from 30 to 70 °C, and increased from 9.2 to 19.9 kg m h when the feed fl...

Utilization of membrane humidifiers is one of the methods commonly used to humidify reactant gases in polymer electrolyte membrane fuel cells (PEMFC). In this study, polymeric porous membranes with different compositions were prepared to be used in a membrane humidifier module and were employed in a humidification test. Three different neural network models were developed to investigate several...

This paper investigates effects of different additives on morphology and subsequently, separation performance of asymmetric flat sheet Polyvinylidene fluoride (PVDF) membranes to separate CO2 using membrane contractor. Five different additives from different chemical families including Lithium chloride (salt), Polyethylene glycol 400 (polymer), glycerol (weak anti-solvents), methanol...

operating parameters and membrane characteristics strongly affect the performance of electrodialysis reversal systems. the most impactful factors are applied voltage, flow rate, temperature, initial feed composition, and ion exchange membrane characteristics; the ph of the feed also has an effect, although to a lesser extent. to determine more precisely how all of these factors impact performan...

We investigated the effect of welding parameters on ultimate tensile strength of structural steel, ST37-2, welded by Metal Active Gas welding. A fractional factorial design was used for determining the significance of six parameters: wire feed rate, welding voltage, welding speed, travel angle, tip-to-work distance, and shielded gas flow rate. A regression model to predict ultimate tensile stre...

one of the main disadvantages of anaerobic wastewater treatment at a low ph is the significantoperational cost due to the addition of necessary alkali. to reduce alkali supplement and thus the cost, thisstudy proposes a sequential multi-feed (sqmf) mode (distributed feeding) and effluent recycle (er) mode.experiments were conducted with a pilot-scale (2.5 m3) thermophilic (55°c) multi-staged up...

one of the main disadvantages of anaerobic wastewater treatment at a low ph is the significantoperational cost due to the addition of necessary alkali. to reduce alkali supplement and thus the cost, thisstudy proposes a sequential multi-feed (sqmf) mode (distributed feeding) and effluent recycle (er) mode.experiments were conducted with a pilot-scale (2.5 m3) thermophilic (55°c) multi-staged up...

the role of nickel as catalyst on the conversion of methane and ethylene in a gas phase flow reactor in the absence of oxygen is studied. in this study, nickel in its different forms is used as catalyst. the role of pressure, flow rate, and temperature on the conversion of feed gases is investigated. the experiments have been carried out in the presence and absence of the catalysts to measure t...