نتایج جستجو برای: electroless ni

تعداد نتایج: 53829  

2013
Guiping Cao

Um eletrodo de partículas compósitas de carbono modificado com níquel níquel (Ni/AC) foi preparado por deposição sem aplicação de corrente com pré-tratamento livre de paládio para melhorar o desempenho eletrocatalítico do eletrodo compósito em uma cela eletroquímica. As condições de preparo do eletrodo de partículas compósitas de Ni/AC foram otimizadas usando-se como índice a razão do descorame...

M. S. Bakhsh, R. Faezi Alivand, S. R. Allahkaram,

Abstract:Electroless Nickel-phosphorus (EN) coatings provide high performance in various industrial fields due to their unique properties such as excellent corrosion and wear resistance. This paper aims to study the effect of ZnO nano-particles addition on corrosion behavior of EN coatings. Various amounts of ZnO nano-particles with average diameter of 50 nm were added to hypophosphite reduced ...

Ch. Dehghanian, N. Eslami Rad*,

Abstract: Electroless Nickel (EN) composite coatings embedded with Cr2O3 and/or MoS2 particles were deposited to combine the characters of both Cr2O3 and MoS2 into one coating in this study. The effects of the co-deposited particles on corrosion behavior of the coating in 3.5% NaCl media were investigated. The results showed that both Ni-P and Ni-P composite coatings had significant improvement...

A. Saatchi M. Alishahi, S. Monirvaghefi

In the present study, Ni-P-CNT composite coating was successfully fabricated via electroless plating. Scanning electron microscopy (SEM) was used to characterize the coatings. The effect of CNTs concentration in the bath on its content in the composite coatings was studied. Furthermore, the corrosion behaviour of the coatings with different contents of CNTs was evaluated using Tafel polarizatio...

The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...

2010
A. Naor N. Eliaz E. Gileadi Aladar Fleischman

Rhenium Re –Me alloys where Me = Ni, Fe, or Co were deposited galvanostatically. The plating bath consisted of ammonium perrhenate, nickel or cobalt sulfamate, or iron sulfate, citric acid, and magnesium sulfamate. The effects of bath chemistry and deposition time on faradaic efficiency FE , Re content, and partial deposition currents were determined. Rhenium contents as high as 93 atom % or FE...

Journal: :CoRR 2006
Ja-Myeong Koo Seung-Boo Jung

Interfacial reactions and shear properties of the In-48Sn (in wt.%) ball grid array (BGA) solder joints after bonding were investigated with four different surface finishes of the substrate over an underlying Cu pad: electroplated Ni/Au (hereafter E-NG), electroless Ni/immersion Au (hereafter ENIG), immersion Ag (hereafter I-Ag) and organic solderability preservative (hereafter OSP). During bon...

Journal: :Coatings 2023

In this study, monodispersed NiSe@Ni particles were successfully anchored on graphene sheets by electroless nickel plating combined with a chemical-vapor-reaction process, in which the first deposited onto and subsequently transformed situ into at an elevated temperature. The obtained product showed unique multi-dimensional coupling structure, namely, (0 D) (2 D), enabled maximum synergy specif...

2016
Zadariana Jamil Enrique Ruiz-Trejo Paul Boldrin Nigel P. Brandon

A novel fabrication method using electroless and electrodeposited Ni/Ag/GDC for SOFC anodes is presented. First a porous Ce0.9Gd0.1O2 x (GDC) scaffold was deposited on a YSZ electrolyte by screen printing and sintering. The scaffold was then metallized with silver using Tollens' reaction, followed by electrodeposition of nickel from a Watt's bath. The electrodes (Ni/Ag/GDC) were tested in both ...

2011
Guofeng Cui Jie Zhao Shaofang Liu Gang Wu

Despite the increasing interest in metallic glasses for a variety of engineering applications, the structure and corrosion properties still remain unknown. In particular, these properties for Ni P alloy, a typical metallic glass, are greatly dependent upon the phosphorus content in the alloy. In this report, a relationship between the structural property and the interface corrosion behavior of ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید