Scandium-reinforced aluminum alloys represent a new generation of high-performance alloys that display numerous advantages over high-strength aluminum alloys. Scandium-reinforced alloys are much stronger than other high-strength alloys, exhibit significant grain refinement, strengthen welds, and eliminate hot cracking in welds. These alloys also exhibit a good resistance to corrosion as shown b...

This article describes the susceptibility of 316L stainless steel to stress corrosion cracking (SCC) in a nitrite-containing chloride solution. Slow strain rate testing (SSRT) in 30 wt. % MgCl₂ solution established SCC susceptibility, as evidenced by post-SSRT fractography. Addition of nitrite to the chloride solution, which is reported to have inhibitive influence on corrosion of stainless ste...

Intergranular stress corrosion cracking &YSCC) is a pervasive and generic problem in current light water reactor and advanced reactor designs that can lead to widespread component failure. IASCC is believed to be due to either to changes in the grain boundary composition, the microstructure or the water chemistry and corrosion potential. Of greatest interest are the changes in composition and m...

The damage caused by corrosion in chemical process installations can lead to unexpected plant shutdowns and the leakage of potentially toxic chemicals into the environment. When subjected to corrosion, structural changes in the material occur, leading to energy releases as acoustic waves. This acoustic activity can in turn be used for corrosion monitoring, and even for predicting the type of co...

The effects of corrosive media on rotating bending fatigue lives (the cyclic numbers from 104 to 108) of different aluminum alloys were investigated, which involved the corrosion fatigue lives of five kinds of aluminum alloys in air, at 3.5 wt. % and 5.0 wt. % NaCl aqueous solutions. Experimental results indicate that corrosive media have different harmful influences on fatigue lives of differe...

A series of stress corrosion experiments were performed on 12 pultruded glass fiber composite materials (two fibers in six different matrices) commonly used in high voltage composite insulators. In this study two types of glass fibers were investigated, namely Eglass and ECR-glass. The tests were performed in nitric acid solutions (pH 1.2) using constant K I specimens that were specifically des...

The integrity and safety of metallic structures can be jeopardized by structural damage (e.g., yielding, cracking, impact, corrosion) that can occur any time. While various sensors have been proposed and validated for structural health monitoring, most sensors only provide data at a discrete point on the structure. Here, a carbon nanotube-polyelectrolyte sensing skin is proposed for monitoring ...

More than 10 years ago, the three major causes of failures in the Israel Air Force were: maintenance (-16% of failures), manufacturing (~14%), and design (-12%). While fatigue (~34%) and overload (~23%) were the two major failure mechanisms, more than 10% of failures were related to corrosion mechanisms. These include stress corrosion cracking, corrosion fatigue, localized corrosion, hot corros...