Wood liquefaction using an organic solvent and an acid catalyst has long been studied as a novel technique to utilize biomass as an alternative to petroleum-based products. Oxalic acid is a weaker organic acid than a mineral acid and wood liquefaction with oxalic acid as a catalyst will result in a higher amount of wood residue than that with a mineral acid. Yet the wood residue can be used as ...

Internationally exploited lubricants are derived from coal and petroleum. Due to their high consumption and effects of their long-term pollution on the environment, it is imperative to use renewable and cheap feedstock for the synthesis of bio-based lubricants. This study presents the synthesis and optimization process of Ethylene Glycol (EG) based bio-lubricant from palm kernel oil. Palm Kerne...

Fast catalytic pyrolysis of wild reed was carried out at 500 ̋C. Waste fluidized catalytic cracking (FCC) catalyst disposed from a petroleum refinery process was activated through acetone-washing and calcination and used as catalyst for pyrolysis. In order to evaluate the catalytic activity of waste FCC catalyst, commercial HY zeolite catalyst with a SiO2/Al2O3 ratio of 5.1 was also used. The b...

The co-processing of an unconventional type of Jatropha bio-oil with petroleum distillates over mesoporous alumina-supported CoMo and NiMo sulfide catalysts (denoted CoMo/γ-Al2O3 and NiMo/γ-Al2O3) was studied. Either a stainless-steel high-pressure batch-type reactor or an up-flow fixed-bed reaction system was used under severe reaction conditions (330–350 ◦C and 5–7 MPa), similar to the condit...

A new cathodic material for electro-Fenton (EF) process was prepared based on a macroscopic fiber (CNTF) made of mm-long carbon nanotubes directly spun from the gas phase by floating catalyst CVD, on a carbon fiber (CF) substrate. CNTF@CF electrode is a highly graphitic material combining a high surface area (~260 m2/g) with high electrical conductivity and electrochemical stability. One kind o...

1Dental student, Harvard School of Dental Medicine, Boston, Massachusetts, 02115, USA. Harvard Catalyst, Laboratory for Innovative Translational Technologies, Harvard Medical School, Boston. [email protected] 2PhD, Director, Bio-Acoustic-MEM in Medicine Laboratory, Center for Biomedical Engineering, Assistant Professor, Department of Medicine, Brigham and Women’s Hospital, Ha...

A heterogeneous Pd catalyst, biologically-mineralized palladium nanoparticles (bio-Pd), was synthesized using sulfidogenic bacteria which reduced soluble Pd(II) to catalytically-active Pd-nanoparticles (NPs). Heat treatment (processing) of bio-Pd (5 or 20 wt% on the cells) made by Desulfovibrio desulfuricans evolved supported Pd-catalyst comprising Pd-NPs held large spherical hollow structures....

Besides the second generations bio fuels, one of the most promising products is the bio gas oil, which is a high iso-paraffin containing fuel, which could be produced by the catalytic hydrogenation of different triglycerides. To broaden the feedstock of the bio gas oil the catalytic hydrogenation of waste lard over sulphided NiMo/Al(2)O(3) catalyst, and as the second step, the isomerization of ...

Light controllable release of antinflammatory zinc ions by a smart multifunctional material composed of spiropyrans and single walled carbon nanotubes (SWNTs) is demonstrated. The exploitation of a number of complementary characterization techniques allows the investigation of both composition and performance of the multifunctional SP/SWNT nanomaterial developed. Moreover, its suitability for p...